gearing

I run a Picco .28 team turbo powered Revo, Qconcepts engine mount & RRP everything in the trans including their slipper conversion. I use Savage clutch bells (17T usually). Problem I've got is I keep destroying the RRP spur gears, I just killed my 3rd this year. I think it's a mesh/flex...

I just ate through my plastic spur gear in ny 3.3. Should I just get a metal spur gear or is there some other things I should do before I put on the metal spur

Hey guys, I have a problem, and have had many solutions found here. I just recently replaced the tires with the trencher tires. I keep burning my slipper pads up, I mean not only the pad, but the plastic in the gear too. I went and bought a new clutch skipper disk, and the backing plate, as well...

I have torn about 7spur gears out of my savage 4.6.. I set the mesh with a paper between, set it, checked it, and then i get about 30 minutes of play and then, with no bumps or wrecks it tears out again. I cleaned the plate where the motor mounts to the engine, and replaced all the bolts. When I...

Hi, i am very new to Nitro cars and recently baught this truck used off a family friend. i have been out with it a few times and all seemed well, tried to tune the engine yesterday but wasn't having much luck. i couldnt get the gears to shift and when tuning the HSN it seemed to mess up the...

Are they better then stock or will it damage something else?It took two tanks of gas to smoke it!!I know my clutch is tight.But, I love the wheelies it pulls without the clutch loose.!!!Ok. back to the best spur???Second time replacing the spur?

Hi I know this is one of the biggest problems it seems everyone has with tmaxx trucks (if your a rookie). So I was told the Stock gear was a 58T and I got 1 and it's not. Was the dealer wrong about 58T being stock gear? I got a 54T (what came stock in my Maxx) I installed it and did the paper...

hey folks just a quick question, but i dont have alot of details, here goes: i was fixing my sons savage 21... he said it just quit moving, well i found that the nut and spring on the front of the spur gear had gotten so hot it actually melted the center out... any ideas why??? i asked if he got...

I'm wondering if someone can help me? I'm looking stuff up on spur gears for my losi 8ight t 2.0 brushless and was wondering if the spur gears for the nitro version are the same as the brushless ? thought i read something online about them using different spurs but i could be wrong.. any help...

Hi All, Is there an easy way for me to replace my spur gear on the Slayer Pro without having to pull the transmission out of the car? It looks like major Brain Surgery in order to do it. I have removed the three little screws from the spur, but obviously the motor is hard up against it...

I have a revo platinum edition, an wanting to know what's the biggest spur that will fit without shaving/mod the chassie? Thanks

I decided I wanted to go toward having more of a punch than speed so I was considering playing with an 18T and a 70t. How much of a difference will that make compared to the stock which if I recall is 22/58.

Hey all I have a stock x4.6 savage which I have fitted a XL chassis, wheels and shell to. Now it doesn't want to wheelie. What clutch bell and spur gear do people use? Obv as its stock it has a 17t clutch bell and 47t spur. Thanks

Hey guys, New to the site. I have a TMaxx 4910 with the 3.3. I got the torque management upgrade and installed it a while back. I've been through 4 gears to date, partly caused by my crappy mesh job, the other half from 2 motor mount screws stripped. I'm meshed good now and have a new motor...

Well I have to change my slipper pads today and I want to no how do u get the spur gear set right so it don't strip it and set it back to stock or back to factory settings and do any body live in Portland Oregon that wants to stay in my blue smoke lol cuz I don't think url be head of me lol just...

Think first gear be too high and lack too much power at take off with 1 tooth bigger on the clutch bell? Will it maintain close to the same top speed as 15/38 and standard ratio trans? Or maybe a lil faster?

Well I discovered the hard way if you install a 66 tooth spur gear with the 20 tooth clutch bell you will not get close enough to the spur gear to get a good mesh on the gears. Even though it seemed to fit tight enough during installation it strip the spur gear in no time at all. To fix...

What will make car faster? Spur gear, less teeth or more teeth? Clutch bell, more teeth or less teeth?

Spur Gears Slipper Eliminator, good idea or bad idea?

So I got a Robinson metal spur gear and it comes with a Bearing rather than the slide on hex my issue is two things. One I can't get the bearing to slide over the hex on the transmission. Sorta stumped on that... I was told to sand the hex a little? Idk. Also I couldn't get any slipper pegs into...