conversion

Can't believe I am asking this but I am considering converting one of my Tmaxx rigs to an emaxx. So figured I would get some opinions on a good conversion?

Hi, I have an old Revo 2.5 that I recently started converting to electric. I am currently running the stock transmission from my 3.3 Revo but I know that the high torque is going to shred my gears quickly. My question is: Does anyone know if a stock E-Revo transmission will mount to my 2.5...

Lrp z.28r-z.28r spec. 2/3 pull start rotor start set complete. Part number 38136. This is an offset rotor start that works great with no mods for big red .28 in savage 25. Jus thought I'd share cuz I had no luck with asking anybody so I jus did extensive research and bam it played off. Bout to...

So I got a Mamba Monster 2 ESC and a Neu-Castle 1515 2200kv motor. I'm used the conversion kit from HPI to strap these bad boys in along with a little rigging. Everything looks good. Also, i'm using 2 Bias 3S 50c 5000mah lipos. I'm thinking this thing should rock!!! 1. It sounds like...

Anyone have any ideas on how to convert standard 1.9 wheels to a beadlock for a scale rig?

Now before anyone starts giving me crap for this lol, I did NOT buy an Octane, just parts of it. I also did this because I've been trying to come up with a way to mod the 3spd in a way no one has done before. Lets also not forget what I do to my savages, I turn them into top speed machines (yes I...

Hi guys Any help on this would be great,plus a list of parts and where to source them all from would be good too... Many thanks Garry

I've always had a problem running hot while idling for more than 10 minutes with the AC on. It's the Mustang GT 5.0 HO engine with a belt drive clutch fan. I'm wondering if anyone has some advise on what would be required to convert it over to electric. The fan would come out and I'd need...

Wuz up guys, I have a mugen mbx5 roller just laying around that I was gonna put an engine in just for fun. Now I want to try converted it to brushless but I can't seem to find a conversion kit for that model ( too old I guess??). Does anyone know if someone makes a conversion kit for it, or if I...

My name is Wes and I have been out of the nitro game for awhile I recently purchased a revo 3.3 and my local hobby shop is a losi dealer and I was wondering what I needed to do to convert to a losi.21 clutch set up exhaust etc... Any help would be appreciated

Well.....I finally got it all unbowed and ready to go. This is going to be a challenging build. The manual is top notch and the best I've ever seen.....the challenging part is the e-conversion. The conversion kit only came with pictures in no particular order and no written instructions so I do...

If the thread exists somewhere in this forum, dont hesitate to delete this post, i just need some unbiased opinions on users that have this kit. I was thinking of ordering this kit from HPI for my savage along with the sway-bar. Is it worth the money? question being because its aluminum, or...

does anyone happen to know what pullstart will bolt up to my nova? ,i dont mind the roto but its the only engine i have with it and i'd much perfer a pull start. i did read somwhere that a .12-.15 pullstart would fit but i dont know which one,if anyone has a part number a would appeciate it...

I purchased my t-max back in like 2001 and ran it for awhile but lost interest and it has been sitting for many years. now I want to upgrade it to pull start and a bigger motor maybe the 3.3 any recommendations on upgrades ? thanks..David

I just ordered a kit( yes HPI discontinued the kit, but my LHS had 2 in stock!) for only 64 bucks, i figured its a good deal. what are the advantages of the XL conversion in your opinions? biased/unbiased, i dont mind feedback:)

Hey gang, Thanks to everyone here who helped me finish my build. As promised here is a video of the truck doing what it does best. Here is the build thread: https://www.rcnitrotalk.com/forum/showthread.php?t=108310 Here is the video: Here is a parts list: Drive Train...

Maybe I'm looking in all the wrong places but finding many parts for the Associated MGT isn't always the easiest, but does anyone know of a brushless conversion kit for the MGT by chance?

My racing teammate and I are fixing to put my slayer under the knife. I have plenty of nitro vehicles and want to do something different to it. The kit I've seen is strange looking. It places the motor shaft facing forward and precariously high and far on the drivers side. Not to impress ed with...

Ok guys, I'm converting my REVO to electric with a Kershaw chasis. It has, what I'd call, a saddle pack configuration so my current 4S packs are out of the equation. That leads me to my question, should I go 4S or 6S? I only have one other electric surface vehicle to compare, but I don't...

Hey guys in need of a little help here, I'm going to convert my Bandit to a Rustler and I'm getting conflicting information on a definite parts list. So far I have. 1654 Wheel Hubs (2) 1951 Half Shafts Long NRust/SLH (2) 2753X Stub Axles Rear (2) 2754 Stub Axle Pins (4) 3139A Alum...