Is it possible to make a two speed tranny a 1 speed? I live in a very hilly area and it seems as though my truggy doesn't have the power to climb some hills when shifting. I thought it was as simple as adjusting it so it wouldn't shift. Lesson learned I now need a new tranny because first gear...
conversion nitro to electric
is it possible? :\
---------- Post added at 1:11 AM ---------- Previous post was at 1:09 AM ----------
any any links to help would be great
---------- Post added at 1:22 AM ---------- Previous post was at 1:11 AM ----------
iv got a 1/10 nitro anyone know any...
*note* this is how i did my conversion. there are significantly cheaper ways you can do this conversion. I chose some expensive items where I felt they were needed.
I received the LST2 parts shown below from a trade with ChesterCheeto (great guy to deal with BTW). I have multiple spares...
i have a vxl rushles and want to raise it up like a stampede so i can mud, any one ever did this? i dont mind spendin some money to do this. would it be better if i bought a truck
hi all
ok I'm thinking of converting my ansmann kryptonite to petrol/gas by installing a 2 stroke engine probably a 25-30cc or could i go smaller if i found a small enough 1HP engine something like 15cc,
also how would my off-road ability be affected if i ran in a front wheel drive...
Does any one run this clutch i am wondering if it would be better then the stock one and its only a few bucks more then the stock clutch just don't want to have to buy two clutch's when i could have bought the right one first lol any input would be great thanks
I've got enough parts left over from building my new picco .28 revo 3.3 to build another complete car with a 2.5 chassis.
I was going to build it up with my old 3.3 motor & bung it on ebay - but my oldest has expessed a lot of interest in having his own 'not a toy' car.
He's 8 - too young for...
I own an AE RC10T3, i want to convert it to a t4. the reason i don't want to just buy a 4.1 or an sc10 is because i already have money in a radio, receiver, velineon vxl3, and multiple batteries. I was wondering what the process would be like to convert it completely. i know the transmission is...
I know the T-maxx has had it time in RC and seems its popularity has decreased alot over the last few years. Seems since about 2008-09 or so good parts for it started becoming harder and harder to find.
I have been combing the internet and it seems that just about everyone has stopped...
So now that my nitro sport is down what and all do I need to do a 3.3 conversion? I know a engine, but do I need the upgrade kit, and what else do I need? Thanks
Okay i got a new 3.3 traxxas motor for my revo. i found the pull start assembly but i need the the peice that connects the pull start to the crankshaft. Where can i find that? I looked on amain, maybe i missed it?
Heres a few pictures of my recently finished LST2 Electric Conversion. I'm running an RX8 and a T8 1550kv on 6S. I have one of the discontinued mega baja bodies for it but I havent gotten around to painting it.
BTW, Just an FYI....the Losi conversion kit for thi smodel sucks. If you are ever...
So I have been searching and contacting HPI in regards to this but cannot find a definitive answer. I am trying to convert my 2012 Savage x 4.6 into an XL minus the engine/powertrain. I Already have the XL TVPs and the XL driveshaft and am now working on the width portion of the conversion...
I've started the LST2 Electric Tekin Conversion heres a couple pics of my progress so far.
http://www.facebook.com/photo.php?fbid=379667302080423&set=a.379667075413779.79780.369184703128683&type=3&theater
I'm thinking i want to switch the 8 shock setup out for some type of big bore HPI or Losi. The LST needs some hardware but you can pick up the stock xxl LST shocks on eBay pretty cheap. I like to bash and do speed runs. It just seems that with 4 shocks your half as likely to break a shock . The...
Here is a easy way to convert your Slash or Slash 4X4 into an 1/8th Scale Buggy. All that is needed in one complete kit sale.
I have the Wheel Adapters,2 Sets of 1/8th scale buggy rims and tires,Buggy Body and Wing
$SOLD!!!!!!!!!!!!!!!!!
Like all other sales it is payPal only(no...
Hello :
I have a Savage .21 big block.
Want to convert to brushless.
What i will need ? I want something fast + 50 mph....Not competion ...
Is there a conversion Kit ? Where ?
Thanks a lot
Luis