Revolectrix now has high voltage lipos out that can be charged up to 4.27V per cell and the cell pro and powerlabs chargers can charge up to 4.3V/C. Looks really cool. I didnt know they even had lipos. I was looking around at theyre regular lipos and they seem like they are pretty reasonably...
Hey guys, been awhile since i last was on here and also been awhile since i've had time to even get back into this amazing hobby. But now that I'm finished up with school I'm going to have some more free time.
I've decided to take on a full build from ground up. All bran new parts and plan on...
Good morning everyone. I have a Revo 3.3 that is driving me crazy. The engine is broken in. It has about 1 gallon of 30% through it. The issue is I start it up once and it runs fine. The next time I start it up 10 or 15 minutes later it's super rich or super lean. I followed the nitro...
I have a brand new Revo and just got it broken in and already have an issue. I have a servo 2065 that is just twitching and not functioning properly. It is the shift out servo. The strange thing is the throttle doesn't work at all. I would thing that would be the throttle servo but it is the...
Alright lads!
Last month I dragged my T-Maxx out to sell it cos I hadn't used it in a year. Well, two minutes bashing and I fell for it again. However, five minutes in I stuffed it into a concrete block, broke top and bottom arms, front diff mount, etc.
Anyway, within an hour I'm looking...
I replaced my 3.3 with a new motor, got it broke in and it does great til it shifts to 2nd gear then instantly strips the spur gear! any suggestions would be great?
My name is Wes and I have been out of the nitro game for awhile I recently purchased a revo 3.3 and my local hobby shop is a losi dealer and I was wondering what I needed to do to convert to a losi.21 clutch set up exhaust etc... Any help would be appreciated
So I decided to take my parts truck and a extra motor I have and build a true 1/8th scale dirt late model bb and all motor choices I have the body I'm building out of aluminum
My Revo 3.3 project and excited to upgrade and get going, some of the parts I've just got to get me started :D
Picture's below
So far....
Picco .26 JL Red dot
ERCM Big Block pipe
Rear Wing & mount
Hot Racing Air Filter
E-Revo body shell ready to paint
Any...
This is a bit of a moan why would you spend hundreds on a great truck and then find out later it has NO failsafe, is this not a bit of an stupid error from Traxxas, not trying to offend any Traxxas owners as I own the Revo 3.3 myself but am worried that one day it may just run away and there...
Moving on....bought a good drivetrain with a 3.3 that's barely been touched...only the first two tanks of break in done by the previous owner. He stripped all the suspension to build an e-revo and I bought the rest along with another really sad roller. I've stripped the old roller and am...
So I took my revo out the other day was running pretty good then it shut off mid run let it cool and it fired back up but wouldn't idle but would run as long as I was giving it a little throttle glo plug or fuel problem I tried back to factory settings and it did the same thing
I just picked up a Revo 3.3 used (no optidrive and a 2ch radio so no reverse) and I was tearing around running great then cartwheeled it. It briefly went into reverse and now it is stuck in neutral and I cannot manually turn the flywheel.
Did my cartwheel knock something off center or do I need...
Ok I am not sure if this is a normal thing with the revo 2.5r. It will stay on for anout 12 sec on a good Idle and sounds normal but then it dies out and I have to blow in the Exhause pressure hose to reprime the carb to fire uo agin ? I an confused I have looked and tested everything for...
Last month I chewed through the plastic spur gear. So I decided to purchase a new 38T steel spur gear along with a new clutch bell.
I put everything together, and now my truck is not getting full power that it was getting before.
When it shifts gears, it sounds like the truck is struggling...
Having issues getting my traxxas revo to shift into second gear since being in storage for 6 years. Not able to get out and test it at the moment so wondering if it should shift gear while holding off the ground or will it only change under load while driving?
Cheers
As above really, wondering if the revo 3.3 had 14mm hex and 17mm hex.
Been offered a set of revo 3.3 14mm wheels and tyres for £20 in good nick. Seems a bargain.
As above, seems there is alot more wheel options for the 17mm hex size, so wondering if i can simply put 17 hex's on mine?
.....ok edit, I've seen i can get adaptor kits to convert to 17mm. I will need th pins and nuts but can anyone recommend a good kit for the revo 2.5r which is cheaper...
Hey all, I'm looking to put a wing on my Revo 2.5R. I've seen the Traxxas mounts: TRX5411 and TRX5413. Also Traxxas wings 5446 5446G and 5412.
My question is which mount and wing would fit my truck or would they all fit?
Also are there any other mount or wing option such as Mugen MBX7...
Evening everybody. I have a new Revo with a 3.3 in it. It was broke in with the Traxxas method. The engine will not Idle. It continues to rev after I let off the throttle. I reset the needles to stock which are 4 turns out on the HSN and flush on the LSN according to the manual. I have...