I posted some questions in the 'Revo' forum about upgrades to suspension with rpm parts? Or others for that matter?
Also looking for ideas for upgrades for the trans. Its all stock and it's a basher So I'm thinking I'd like to keep reverse (if at all possible) I blew up the trans and replaced...
Ok so the only way I can get my 3.3 to start and idle is for it to be at half throttle. I myself have been over it numerous times as well as the hobby shops, and can't figure it out. Brend new everything except piston and sleeve,because they were still in good repair,new carb,tank,lines. Lots of...
Ok, some of y'all know about my Revo project. I should probably update that thread. ..
Anyhow, this thing... it's been sealed, I found the thread from the fella at ERCM, I've forgotten his name. The thing sounds great, for a small block. Good smoke trail, sounds like it should, at WOT, you...
My Revo has been eating up igniters, I've just replaced the 2nd one a few days ago and its gone bad, its the spare Traxxas sends in the RTR kit. What causes GP's to go bad? running rich?? My 5yr old Rushler's on it's 2nd GP.
Hello,
I admit, it's been a long time since I last posted in the community, so an informal hello to all. That said, my previous questions were always answered quickly and accurately so I know the responses will continue to follow suit. I have a Revo 3.3 that hasn't been fired up in almost 2...
So, a friend of mine called me up the other day to work on some stuff for him because he's a truck driver and doesn't have time, and was at the point we all get to with life sometimes. Long story short I'm acquiring a couple new projects. The Revo 3.3 that's complete was pretty well gummed up...
So.. a buddy of mine calls and says "I've got 2 Revos, a Mini revo and a Redcat Rampage. They all need work and I'm tired of messing with them"
As he's an over the road truck driver, and I'm laid off, I took him up on the offer to tinker.
I'm really starting to understand why you guys bash on...
Hi,
My husband has a revo 3.3 and when he got it 7 months ago it had a Ez start engine. He has since the switched it to a pull start and the engine is a lo c. I've done replaced the pull start,bearings,engine,air filter,tires,etc. Now the pull start cord is snagging and staying out then...
Ok... I'm fed up. And I need some advice. I have this CEN Matrix truggy thing, I've broken it again. I think this time it's going to the scrap pile. I'm so sick of not being able to find and/or get parts.
So... I have a Castle 2200Kv plant, a Mamba Monster, and a killer Savox servo. Somebody...
Rooky78
Thread
castle creations
cen
electric rc
savage
savox
traxxasrevotraxxas stampede
truggy
Hello,
I want to install an LRP .30x big block motor onto my Revo 3.3. I have seen many videos with this done, but have yet to find a good guide on how to or parts list. I'm trying to put together a parts list right now to order everything and see the final cost. But i am having trouble figuring...
Hello,
I want to install an LRP .30x big block motor onto my Revo 3.3. I have seen many videos with this done, but have yet to find a good guide on how to or parts list. I'm trying to put together a parts list right now to order everything and see the final cost. But i am having trouble figuring...
Ok well I finished my revo Big block quest and just wanted to give info on how i did it....
I used golden horizon upper hitched control arms which give you more than enough space to fit any rotor or pull start using the trx mount !!!! ..I did have to move the Trans forward and also shave a the...
Mook_589
Thread
lrp
nitro engine
nitro fuel
rc body
traxxastraxxasrevo
Truck is 4 tanks on the blown motor and 6 on new. It revs and ran great for break in now revs but won't move. I put new shoes on and clutch rebuild. Still the same if I loosen the spur the bell and it spin if I tighten they stick. Mesh is good, any help?
I need the front and rear suspension and a transmission. Let me know if you have anything. If you have a box of what used to be a Revo, that might work, too.
Need this, for starters:
I've only posted in this forum one other time, but it was very helpful to me, so I'm gonna try again.
I crashed my 3.3 Revo the other day, and since I was left replacing a pushrod, I thought I'd do the A-Arms too (which would give me a set for parts anyway). Well I removed the broken pushrod...
Hi, I have an old Revo 2.5 that I recently started converting to electric. I am currently running the stock transmission from my 3.3 Revo but I know that the high torque is going to shred my gears quickly. My question is: Does anyone know if a stock E-Revo transmission will mount to my 2.5...
I'm planning go BB on my revo since i have only problems with my trx 3.3 (air leak).
What I'm planning to buy:
OFNA JL .28 MAX
THX Pipe
OFNA Mount for Revo
OS Medium plugs.
In thoughts of driveline do i need to do any upgrades?
Does anyone know if this is a good fit for the revo 3.3?
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEPD0
For some reason i find that a lot of the bodies i see online do not have enough spacing between the front and rear wheelwells, i attached an example of one.
Can someone take a look at the pic and tell me what parts were used to make up the throttle linkage? My son bought a Revo with a Losi m26ss; the linkage is crap, hangs up, doesn't go WoT. I really like this set up but having trouble putting the parts together.
:thumbs-down:
Hello,
I have T/Revo 3.3...about 3 years old. Overall not much use, but recently have renewed interest with some local guys who are also getting started again. That said, I performed a basic truck service and now that the battery packs are fully charged, I started to test the...