• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

The "What did you buy today?" thread...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Canon EF 50mm F1.8 lens to replace the one that got broken, a cheapo remote shutter release to replace the one that I gave away. Some bore brushes, a 42 inch double rifle bag, a HIVIZ front sight for the MK IV, and a set of Queen sized sheets.
 
Shock caps for my Stampede 4x4 and the thermometer...

shock caps.webp
thermogun.webp
 
Just ordered a set of front RPM arms for my ERBEv2. Ripped a pillow ball out last fall and "fixed" it in the field by using a small ziptie jammed in it to get me by. Although, I vaguely remember seeing that the 1.0 RPM arms work on the 2.0... which I have a full set of from when I transferred all the necessary parts over when I got the 2.0 roller. I had true-track on the rear, which won't work, but pretty sure the fronts would... without the v1 rpm carriers. Guessing the 2.0 ones may be more beefy. If not, I still have a backup set on the old chassis in the closet.

A set of RPM towers for my stampede 4x4 vxl. Noticed while looking at it yesterday after installing sway bars that my rear tower was cracked in the middle.

An esc plate for my outcast as when I mounted my max6 in it, I mounted it too far forward and had to grind a bit off my Armor Werks servo mount so it would fit. Then after thinking about it, I need more of a gap as chassis flex will likely smash the side of the servo mount into the esc, so grinding it was a bit of a waste... although, I can't easily move it more than a couple mm, so I'll end up with about 4mm gap which is good anyway.

Also, more canned air.
 
Just got my proline rock crusher wheels in and placed order for more competition cut foams from Crawlerinnovations and some more wheels from Amazon. get my proline Hyrax tires Monday.
 
That's what I have on my dually. I prefer that 1080 to the Mamba Micro X crawler ESC for the simple reason that you can program the 1080 with the card on an external port. The Mamba Micro X you have to have the Castle link and a laptop in order to program it.
 
Havent bought much exciting for a long time. Did buy a '11 Colorado 2wd 3 or 4 weeks ago. Havent gotten rims yet but soon hopefully. Did, of course, do my stereo first thing. Running JVC head unit, Skar Audio mids and highs and single 10".

Paid for my chemical applicators license test yesterday too and mexican food for lunch.


Oh, I did buy a new matress a month or more back too, Dream Cloud. Old one had to much action.....ok, probably not.
 
slowngreen said:
Paid for my chemical applicators license test yesterday too and mexican food for lunch.

Oh, I did buy a new matress a month or more back too, Dream Cloud. Old one had to much action.....ok, probably not.
Click to expand...

Good choice on the sound system.
I'm guessing the chemical applicators license is needed for whatever you'll have to use to clean your toilet after that mexican food.
 
Rolex said:
Good choice on the sound system.
I'm guessing the chemical applicators license is needed for whatever you'll have to use to clean your toilet after that mexican food.
Click to expand...
The chemical applicators license is required for the anti-dust materials for RC models. Do you have yours? lol
 

Similar threads

Muscle_Car_Lover
What cars did you see today?
Replies
1
Views
137
9x19
9x19
TheRadWarrior
What stupid thing did you do today?
5 6 7
Replies
131
Views
4K
CertifiedMike
CertifiedMike
Cranberry Juice
What funny thing happened to you today?
Replies
8
Views
356
Cranberry Juice
Cranberry Juice
Doom!
Hey did you guys know?
Replies
8
Views
374
Xraycer
Xraycer
WickedFog
What in the hell did I stumble onto?
Replies
8
Views
391
Ramp addict
Ramp addict

RC Builds

Back
Top