kyosho stadium truck clutch and bell

[Gman3000]

Hi All,

I need to replace my clutch pads and spring, and bell bearing.
It's not easy to find the bell and bearings parts. Does anyone know if there are any 3rd party options, or if any other kyosho models share the same bell etc?

Many Thanks

 

[ohsnap]

I don't own a Kyosho Stadium Truck - so I'm baffled as to why what I would assume are common parts (ie universal 1/10 nitro) would be difficult to find.
The bearings for example - measure and source them (ID x OD x thickness).

Do you have pics of what you are looking for?

CertifiedMike knows Kyosho - I'll bet he'll drop in sometime and can help you out.

 

[fstnd]

Kyosho has various unusual designs in their older nitro models, this might be one of them. But a picture or at least RC model name would help.

 

[Gman3000]

 

[Suburban_Hooligan]

I'm going to throw this out there, might get told I'm stupid. don't know, don't care. but if you can't find the specific Kyosho part number. i believe clutch bells are pretty universal, so i would imagine clutch shoes are to, hell maybe even flywheels. which brings me to my maybe stupid idea. try shoes for another vehicle. sense your dealing with a stadium truck that most likely has ether a .12 or .15 in it (hell maybe a .18 idk). in this case maybe shoes/spring from a nitro rustler or HPI bullet. been meaning to try that on my RC10GT for a while now cause the clutch on that doesn't have a spring and it likes to creep away at idle but lately iv been suffering from a case of not giving a damn.

 

[Gman3000]

View attachment 274061View attachment 274062

Found some shoes (the correct part number) but still no bell

 

[CertifiedMike]

https://www.ebay.com/itm/2758477144...Bj5dGNWKy0DofS21PH8VBKP6o=|tkp:Bk9SR4zgra3EZw

Is this your bell?

 

[Gman3000]

https://www.ebay.com/itm/275847714490?_skw=kyosho+fm222+clutch&itmmeta=01KRHDBDZW17E420W95Z1XTBPK&hash=item4039ce16ba:g:CbMAAOSwLwVkXfwC&itmprp=enc:AQALAAAA0GfYFPkwiKCW4ZNSs2u11xCso5tB9nPelO5ww4kj+G3LCrxnbpKAo7bZ5USBYrRHdl+xWKfpAnEKoIldGJAZYq9eRu+WuFflfKoFh/fo9wj3Dohi6YIj--093HkffxwPInrbVyUGTQ3zxWZcBQtCckOnRvLLImeuvo6EAWMHcJhSn9iUUOxFYAWZ/ByX40MrYfZLOyUCr+mR4xV5VwJKckBOeIeYMmxICX/Va2MPcPot4cActB14AI4AGhwSnzBj5dGNWKy0DofS21PH8VBKP6o=|tkp:Bk9SR4zgra3EZw

Is this your bell?

The Bell part No. is SD54. I@m also based in the UK

 

[CertifiedMike]

https://www.infernosonly.com/Kyosho_Clutch_Bell_13_Tooth_p/kyo97034-13.htm

This should help.

 

[Gman3000]

https://www.infernosonly.com/Kyosho_Clutch_Bell_13_Tooth_p/kyo97034-13.htm

This should help.

Thanks but I need 14 tooth and something avaliable in the UK.

Regards

 

[CertifiedMike]

If the other site is correct about this being same fit as Inferno, this should fit. Do homework before you order.

https://www.kyoshoeurope.com/product/8614796421474651BB64D43ABAE3E7BE/

 

[fstnd]

Aliexpress should ship to the UK..? They have 14t clutchbells and clutch shoes that fit them. However, your clutch shoes are a really old design and aren't available usually. For the longer term I'd honestly buy a whole set with flywheel, usually 5x10x5mm bearings and clutch. If you insist on using your current clutch, you could try to make them work with a spring from modern 2-shoe clutches. But the clutch spring doesn't even look deformed in the pic.. it looks like you can hook up the ends and use your current clutch. What makes you want to replace it?