traxxas stampede

I bought these wheels/tires and put them on my rustler, only to find out they hit my body/pipe $30 shipped

Picked this up from my cousin and now i need some $$$ for college. Older Traxxas Stampede with mechanical speed control (model 3610). "The Stampede is loaded with features, such as a new wide-ratio transmission with ball bearings; adjustable slipper clutch; high-torque, Stinger 20-turn...

this is a used but in very good condition truck. i got it as a partial trade from a friend, and i do not like electric, lol. it has a 17t motor on it now, and will come with a 19t and (what is said to be a) 10t motors. the stock motor was a 20t when bought.it will come with 3 - 7 cell batteries...

Need some help, Ok i was running the pede in the yard it started to lost power,and would`nt go any where so i checked it out and found that the white wire and the blue wire on the esc were both loose, now the white will come all the way out, can that be fixed or do i need a new esc?:\

I have a Stampede VXL, My son ripped the steering servo out of it, Hit a tree in the yard full speed. Needless to say he messed it up!Busted the case and slung the gears all over the yard. So what is a better servo to use ? Standard replacement from Traxxas or a different brand?

Just got the new to me pede in and gave it a little taste of what it's in for. It came with a lot more than I was expecting! I knew about the Novak 6.5 and the RPM front bumper but I was surprised to see RPM arms front and rear, RPM 5x11 bearing carriers f/r, Traxxas big bores f/r. I...

I want to do some durabilt upgrades to my stampede, I ve been reading all the stuff about the ultra-pede, and was just wandering what is overkill and what is a gimme , I mostly run ... Hell i will run anywhere they let me, like the local bmx track alot.. help please..:)

I found what I wanted, thanks to all that replied!

I'm looking for a stampede to put a brushless setup in. I would but a complete truck or a roller chassis, whatever you've got. If you have any other similar trucks or buggies that would be good for a brushless conversion let me know. It has to be 10th scale or smaller for the brushless system...

I have a trx 2.5 set-up with supercharger, thinking of putting it in my stampede, am i stupid, and do you think its a bolt-on.=devil

I'm new to the whole rc thing but i know the pede thike its the back of my hand . I have 2 motors one is a epic 15t and the other is the stock titian. nither notor seems to have little if any power at full throttle. Even with 7.2v pack (peaked) and plug them in. everything else works. What do i...

Up for sale is my Traxxas Nitro Sport. It has the 2.5 conversion done, engine has about 2 gal through it. Broke in propper. Has RPM rear arms, MIP CVD, Like new ProLine Bowties out back, and ProLine Step Pins up front at half. Custom Painted 2 tone Dodge 1500 Body with decals. Comes with servos...

Well on the back wheel of my stampede when I turn one side the other stays still.. As far as i remember and on every other car i have ( 4wd's ) when one spins other should go the opposite direction. Am i loosing it? lol

Just picked up this used Traxxas Stampede from my cousin. I'd say its about 6 or 7 years old. It runs but i'd like to improve speed and run time. I know I need a battery and motor. Any ideas on a suitable motor that wont't break the bank?

I've wanted a Pede for so long I got mad and bought a semi roller and ripped my rusty apart to build it...............................MAN I'M GLAD I DID!!!!! The stampede is everything I hoped it would be :excited: Pulls the front up even with my cheap radio shack 2000mah battery pack...

When I got my stampede I pulled it apart and cleaned it up...this was my 1st R/C and I like Locked drivelines in real life so y not on the R/C I had an extra tranny so I locked the stripped planetary gears with some JB weld...sorry for the lack of "technical terms" Here are the reasons not to...

Hey guys as most of you have seen I'm very green to this hobby and I had some trash Torq engines that did not have the tailstocks on them and I found 1 on ebay for cheap with everything except for the exhaust on it... (questions listed at bottom highlighted in blue to skip my rambling) The...

looking for a pede tranny in great shape.

Would trade for a Revo roller, or perferably a T4 All the gear, beagle not included http://s20.photobucket.com/albums/b246/psunitro/?action=view&current=indytruggy080.jpg http://s20.photobucket.com/albums/b246/psunitro/?action=view&current=indytruggy081.jpg...

I was looking at the stampede for a budget (under $500-550) brushless, and i saw that traxxas made the brushless stampede what are your opinons? also where could i get a good lipo setup? http://h1072203.hobbyshopnow.com/products/description.asp?prod=TRA3608