kyosho

Kyosho Fazer MK2

Kyosho Fazer MK2

Kyosho Fazer MK2

The box.

I was able to ordrer my Kyosho Fazer MK2. They were out of stock for about a year. I will be doing upgrades. I bought the metal center driveshaft and replaced the plastic one. I will be upgrading to brushless & sensorless motor with ESC. I bought some foam tires for my Kyosho FW06 also a 1/10...

Slammed it into a parked car. Surprisingly, hardly any damage. no broken parts, just a little tear on the body and a bent body clip. Installed the foamies all the way around. Running 30mm as opposed to 24mm. Wider wheels and slightly rubbing on the steering turnbuckle. Also, black residue on exhaust

The Kyosho Icarus is a 2WD entry-level RC car from the year 1985/1986. It has the same chassis as the Pegasus, Cosmo and Cox Bandido. The original motor is the 360ST, size 550, 22 turns - 22,000 rpm and it has independent suspension on four wheels with oil dampers. This buggy is the version that...

Hiya, I need help to ID my car. It’s an old Kyosho I got gifted from a family friend a few years ago and I can’t remember what it’s called. I don’t have the best pictures but if anyone knows I’d be super grateful. I’m not home at the moment so can’t simply check what it is for a while and need...

I have this nitro monnster truck, and I'm wondering what its worth. I THINK its a vintage kyosho nitro usa-1 crusher, but I'm not 100% on that. Everything seems to be in good working order mechanically, and in good shape visually. I think its been sitting for quite a while, because the engine...

Installed led light kit, new wheels - 3D printed - off eBay, tires to fit, front end weights and shocks - hot racing.

Hello Everyone, I am a big Kyosho fan and I have recently acquired the MP10T and finished to convert it to Brushless/Electric. Even though the conversion process is quite smooth and easy there are a few little things that are good to be aware of before starting. I have made a short tutorial...

Hi, i'm using my mp9e Evo to build a speed runner. Currently i'm only getting to 120km/h(mamba monster on 6s), because I can't put bigger gears as the motor mount can't be moved further from the center diff. What are the options to solve this? A smaller gear on the diff is also not possible...

I wanted to.know what battery would you suggest on a team corally dementor 2s-6s capable esc is 180amps now it's not just choosing the highest 6s battery correct? If I were to try saying a 6s 5000mah 90c rated battery my esc would cut out right due to over amperage. I'm new to this rc world but...

Kyosho 1/8 MP9e Evo complete RTR package Futaba, Tekin On Ebay https://www.ebay.com/itm/Kyosho-1-8-MP9e-Evo-complete-RTR-package-Futaba-Tekin/143829035605?

Hello RCT Nation! I am in the process of aquiring pieces and parts for my and could use some help. So far, I have the kit, a few different pinion gears (28t, 30t and 32t), a fancy exotech motor mount and battery mount. As for motor/esc, it seems hobbywing has a decent reputation. Looks like...

I recently got a kyosho inferno mp7.5 from a friend that couldn't get it working and he got it from a friend. I've stripped it down and gave everything a nice clean and put it back together following the instructions. Everything seems to work but when i accelerate the car barely rolls. Any idea...

Kyosho FW Run on the a longer street with some fine tuning and temp control. Running stock tires. Cutout too much of the front windshield and wind making it hard to control.

Just bought this car. Still breaking it in and tuning it. I still want to tune it a bit more before I take it out onto a tar track. I replaced the rubber tires and went with slicks and it handles very well on the street. It does lower it more than stock tires by about a 1mm. It sits 5mm stock...

So I scooped up a Kyosho gxr28 nitro engine for a back up swap big block. The exhaust manifold it came with is a left hand side(driver-side in US) - looking from back of engine I would prefer it to be on the right side. The exhaust flange is a flange bolted to the engine, so it doesn’t use a...

Has any one ever upgraded a nitro rc from 1 speed drive to a 2 speed drive In my case its a Kyosho inferno neo 2.0 Will be using the parts from the kyosho inferno GT2 Thanks