tntpoof
Whats Up Doc?
- Messages
- 4,466
- Reaction score
- 2,340
- Location
- Taylor Michigan
- RC Driving Style
- Bashing
- Racing
- Flying
- Boating
put a new alternator in my 20 year old truck.1.300.000+ miles. twin turbos make it a tad harder..
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That would be fantastic with motion detection. HELL YEAH MANYes, that is possible. Some goggles will sense head turning, and that can control a channel. So you just mount the camera atop a servo.
I have never seen anyone go 360 with it though. Not sure if the goggles do that. But if not, you could increase the camera rotation using gears
Oh man that's always a fun day with turbos in the way.put a new alternator in my 20 year old truck.1.300.000+ miles. twin turbos make it a tad harder..
"Service an Engine Rope Starter - RC Boat Magazine" http://www.rcboatmag.com/service-an-engine-rope-starter/Reassembled the Boat engine and carburetor, need to run to HobbyTown and get a couple of gaskets and the will be done. I need to snoop around on here and see how to re-spring the pull rope thingy.
That sucks, but kudos on figuring it out! I have done that a few times working in my dad's small engine shop. At least you learned something, so not a total loss.Well I thought I was smart - I made a tool to spin the clock spring easily and also be able to hold it in place while I got the rope back through the hole. Well it worked to easily and I overtightened it and broke the stupid spring. Crud. The old famous "one more turn" got me. I knew it was getting tight....
Ya, if I can find a replacement or at least a replacement spring!That sucks, but kudos on figuring it out! I have done that a few times working in my dad's small engine shop. At least you learned something, so not a total loss.
I am sure someone can point ya in the right direction.Ya, if I can find a replacement or at least a replacement spring!
What type of boat motor? Pulls should be universalI am all ears. I plan to run to HobbyTown tomorrow...err today, with hopes this is kinda a universal deal. I know they make different sizes but hoping there is some kind of universality and this one is a common size.
Gotta love Amazon sending out packages on a Sunday! I have been curious how that works, because they show up in a USPS van. Does USPS have a van rental?still gotta finish up the K8 today and I hope to start on my 120A battery discharger today but I'm waiting on 1 item to be delivered. Amazon says sometime today by 10pm so who knows if Ill get it early enough to start that today or not.
Are they different motors? I'm guessing yes. If you can find one with the same bolt hole and fits your ineway bearing. Then you should be good no matter who makes itit is a .16 Kyosho - Ya, I see lots of them that look right but I am pretty sure there are different sizes. One guy showed measurement's on his, so I measured mine, I they are different.
That is what I am hoping tooAre they different motors? I'm guessing yes. If you can find one with the same bolt hole and fits your ineway bearing. Then you should be good no matter who makes it
Love the Sunday deliveries. Good? Will have to double check never noticed that. If I see when my batteries come between 10:45 and 1pm today yeah buddy usually just get a text your stuff is at door.Gotta love Amazon sending out packages on a Sunday! I have been curious how that works, because they show up in a USPS van. Does USPS have a van rental?
It's almost to the point where Amazon will be doing all deliveries you can get everything I mean everything threw them and if your a prime member sometimes I get it next day depending what time I place the orderI think it won't be long and you will see a merger between UPS and Amazon
That is what I am hoping too