tuning needles hsp warhead 2 speed

[Dinkum325]

can someone tell me the ideal settings for low speed needle and high speed needle from fully closed position?
i have ran in my buggy but now it seems to be running slow.

also wats the go with the disc break? does it even work, my buggy cuts out when i push forward on the trigger. is this supposed to happen?

I'm starting to think this brand of rc are crap!

 

[frickenjoey]

Sorry there is no magic setting to turn an engine. Too many variables involved. What works for me here might not work for you due to temp, elevation, humidity, barometic pressure ect....If the engine cuts out when you hit the brake that mean your idle stop in the carb is set wrong. Pretty easy to fix. Check out some of the stickies on this page..has some really good info.

 

[Dinkum325]

thanx for your help but the link didnt work?
could u post again

 

[nikdafoe]

follow this chart and it should help
https://www.rcnitrotalk.com/forum/showthread.php?t=60832

 

[jai tisdell]

i had the same problem take the filter of and look in and pull the throttle back and see if the carb closes if it does you need to adjust the small nut behind the spring on the throttle linkage it should help

 

[pongo]

your a peepee-head