Trying it your way

[Heisenburg]

Temp is ice cool after several high speed passes. Never drove my beauty cars like this

 

[BobP]

do you have TSM on your car? turn it all the way down.

 

[Heisenburg]

Bought a receiver without.

 

[BobP]

you might need a bec to get the amps you need for the servo

 

[Heisenburg]

Got to get pix for you guys

 

[Heisenburg]

What about moving the ESC to the front, and possibly run longer wires? Do they make extension wires for this? Advisable?

 

[Heisenburg]

What size motor to ESC leads do I need? 6.5mm? Steering this thing under acceleration is like trying to drive a basketball.

 

[Heisenburg]

What is a good aluminum steering linkage to get? One with bearings, right? What brand?

 

[Heisenburg]

On a 12 awg, what size is the bullet? (connector)

 

[Heisenburg]

Handles like a champ, would like to add sway bars. Any ideas how to start? Maybe a kit I could diy?

 

[Heisenburg]

Where can I get premounted front bandito st tyres for rustler?

 

[BobP]

horizon hobby

 

[Heisenburg]

Do you have the part number? Black rims preferred, but I can paint

 

[BobP]

https://www.amainhobbies.com/duratrax-bandito-sc-1-10-onroad-truck-tires-2-c2-dtxc3797/p642440

https://www.amainhobbies.com/jconce...ls-w-3mm-offset-black-2-sc5m-jco3344b/p212763

https://www.amainhobbies.com/jconcepts-advanced-formulated-tire-glue-medium-jco2043m/p209116

sometimes you have to build what you want

 

[Heisenburg]

Are those taller than Anaconda? I like that I get to keep the nose on the ground through the mid to upper mid throttle range at least

 

[Heisenburg]

 

[Heisenburg]

 

[Heisenburg]

I went with Bandito ST tyres on the back, since I sensed it needed more grab coming out of turns. Handles quite formidably with the ESC mounted up front.

 

[olds97_lss]

https://www.rcplanet.com/hobbywing-...bo-hwi38010201/?ref=isp_rel_prd&isp_ref_pos=2
Here's the motor
https://www.prolineracing.com/performance-parts/power-stroke-shocks-front.asp
front shocks
https://www.prolineracing.com/performance-parts/power-stroke-shocks-rear.asp
rear shocks
https://www.miponline.com/MIP-X-Dut...pede-Rustler-VXL-Nitro-Stampede-Rustler-18140
axles
https://www.integy.com/st_prod.html?p_prodid=16788&p_catid=142#.Xk2uJ8LsY5s
suspension
https://www.amainhobbies.com/savox-sa1230sg-tall-digital-steel-gear-servo-sav-sa-1230sg/p234358
servo
good luck with it and let us know how it's going

For the proline price on those shocks, I'd just go with the GTR's from the slash platinum. They are really nice and beefy with a lot of tuning options/springs including the variable damping kit. That's what I run on my slampede 4x4 and they take a lot of abuse on that thing.

 

[Heisenburg]

Yes, those are sway bars on a VXl Rustler.