So, What R/C Did You Run Today?

[Hornet68]

HAIBOXING 1:12 Scale RC Cars 903 RC Monster Truck, 38 km/h Speed Hobby Fast RC Cars for Kids and Adults Toy Gifts, 2.4 GHz 4WD Electric Powered Remote Control Trucks Ready to Run 40+ Min Playtime​

 

[DavidB1126]

Got a couple batteries charged up still from track day Saturday. Got 2 more batteries for the slash, 1 for the rusty and 2 for the mini b I'll be running down across this week. Gonna get the bashers ran down tomorrow before the rain.

Gotta tighten up a camber link screw on the slash. On the driver's side front. The shock tower, the threads are stripped out. Used super glue in the past which helped a lot but guess I gotta apply some more. Probably gonna pick up a set of tie rods on Jenny's RC, stock steel ones so I can use a longer screw since these Traxxas aluminum ones uses a Phillips screw which is stuck in from the factory sooo yea.

Rusty, at the end of my bash session I noticed the motor had some drag or something and was making a weird noise while under no load. Took the motor off. Tried to get the back plate off but it was stuck on so I put it all back in reset the gear mesh and it seems back to normal.

Anyways good looking trucks and builds here.

 

[Suburban_Hooligan]

did some Mini Z drifting in the garage again today.
attempted to drive a Radio Shack Porsche 959 but idk if the AA's were crap or the 9v's. ...or both... it moved slowly under its own power but wouldn't steer.

 

[9x19]

...

Anyways good looking trucks and builds here.

From this angle, I can't see them, those 2WD models are blocking the view!

 

[Littlemotor]

From this angle, I can't see them, those 2WD models are blocking the view!

 

[DavidB1126]

From this angle, I can't see them, those 2WD models are blocking the view!

Ight let's trade!

 

[DavidB1126]

Oops

Kachow...

 

[CJSRCLIFE]

Today i got to finally run one of my RC's this month, I ran my XO-1 this afternoon and it was a blast.

 

[Chubaka]

My f450 got ran. The jato was fired up. Tomorrow it will be ran.

 

[WickedFog]

My f450 got ran. The jato was fired up. Tomorrow it will be ran.

View attachment 236327

@majin will be very disappointed in the dirt to water ratio of that puddle. Such a shame!

Glad to see it back on its feet bro!

 

[Doom!]

The Wookie said: My f450 got ran. The jato was fired up. Tomorrow it will be ran.



I say there, yer gonna need to rake a bit if your lookin' for mud son! Some folks just ain't too bright I tell ya.

 

[Chubaka]

@majin will be very disappointed in the dirt to water ratio of that puddle. Such a shame!

Glad to see it back on its feet bro!

We just had rain for a week straight. It's all lakes of different sizes and scales. Besides that my parts to put it back in 4wd just arrived. Hopefully next weekend it can go to the mud spa.

 

[Chubaka]

The Wookie said: My f450 got ran. The jato was fired up. Tomorrow it will be ran.



I say there, yer gonna need to rake a bit if your lookin' for mud son! Some folks just ain't too bright I tell ya.

Being at a commercial building I'm not trying to piss anyone off. At the last compound I had it made. But at home I'm about to till the side area I have for a crawler course.

 

[RudyF6]

This little beastie got a ride today. Been a while and I'm not sure why
It's a lot of fun for an RTR with big tires!

 

[WickedFog]

This little beastie got a ride today. Been a while and I'm not sure why
It's a lot of fun for an RTR with big tires!

Nice rig. Not sure you can really call that a RTR though, considering it is built from 100% aftermarket parts made by Furitek

They eventually realized one day they made every single component for the SCX24 and various other rigs as hopup parts and decided to start selling their own trucks from those parts. I want one.

 

[RudyF6]

Nice rig. Not sure you can really call that a RTR though, considering it is built from 100% aftermarket parts made by Furitek

They eventually realized one day they made every single component for the SCX24 and various other rigs as hopup parts and decided to start selling their own trucks from those parts. I want one.

It's basically a CR-18 Pro, but brushless. I think the "Juiced up" brushless is a cut above this, has angled skid frame.

 

[RudyF6]

It's basically a CR-18 Pro, but brushless. I think the "Juiced up" brushless is a cut above this, has angled skid frame.

I've run it with the CR-18P Unimog body and it doesn't really care about the extra weight with those (HEAVY) wheels and tires!

 

[Mrgoodwrench35]

Got to run the Capra today with the wife in a Trx4. The weather has been great here lately, had to take advantage.

 

[RudyF6]

Ok this is next. Can't hurt anything with the minis!

 

[DavidB1126]

Mini
With slicks
Only on the concrete lol
Because that's all I got