f1_
RCTalk Rookie
- Messages
- 20
- Reaction score
- 0
- RC Driving Style
I know nothing at all about these cars. I have an old tg10 that has been in it's box for years. It was used twice then stored so I know it's in good condition. Apart from needing a new air filter and some gunk stuck to the inside of the fuel tank it looks brand new. I would just like some quick info before attempting to restart it myself so I don't cause any damage to it.
Firstly, what kind of fuel do i get for it? I seem to remember there being different concentrations of fuel available for these things. I assume I'll have to clean the tank first, what do i use and what shouldn't i use. Is there anything else I should do with the actual fuel line or the engine itself to prepare for this before putting in the fuel?
The last time it was stored years ago, i put some engine after run oil in the engine so hopefully that helped keep it in workable condition after being stored for several years.
Firstly, what kind of fuel do i get for it? I seem to remember there being different concentrations of fuel available for these things. I assume I'll have to clean the tank first, what do i use and what shouldn't i use. Is there anything else I should do with the actual fuel line or the engine itself to prepare for this before putting in the fuel?
The last time it was stored years ago, i put some engine after run oil in the engine so hopefully that helped keep it in workable condition after being stored for several years.