scale_only_4_me
RCTalk Basher
- Messages
- 71
- Reaction score
- 0
- RC Driving Style
Nitro TC3, FT RC10gt, Ofna Dominaor extreme for sale
First car: Ntc3 new
This car is just built, never raced
I installed a mt12 and was going to use the car in a regonal race but couldn't make the event after all. it was run for about 30 seconds just to test the gear mesh then put away
The car is flawless, not one scratch, the body still needs triming wing needs mounting
I've decided I just don't have time to get into on-road racing at this time
Included is
the kit as you see it
a brand new 1000ma battery
stock proline v-grove tire/wheels
4 pair of Jaco nitro shoes tires NIB (1-35shore 2-40shore, 1-45shore)
No servos or receiver that are shown in the picture
Email me for more pictures
$300 + shipping Firm for the package
Next truck: Factory team rc10gt
This truck has seen about 10 race days/nights and was always keep in great working order.
Not one broken or worn part on this truck
Parts were replaced when worn. It has the typical scratched etc,
The engine runs great and has good compression
This is a great race package for the new racer. I’ll only selling because I’m running a different factory truck
Package comes with:
RC10 gt Factory team kit
OS cvr .12 with rex pipe (2 gallons) and an extra piston/sleeve (used ½ gallon)
NIB Futaba Magnum Radio system
Hitec hs605 throttle/brake servo
New 1000ma receiver battery pack
Aluminum throttle/brake servo mount
Lunsford Ti turnbuckles
MIP 4-1 clutch, (New not yet run)
Aluminum MIP CVDs
Trinity receiver box
Lightly used hole-shots on yellow wheels
Like new pro-line edge front on yellow wheels
RPM ball cups/bumper
Body is a little beat up, but useable
New parts with only one race on them
New clutch bell, bearings, spur gear and slipper
New a-arms front and rear
New front axles
New steering servo mounts
Miscellaneous screws, parts, clutch shoes, etc. (new and used)
Extra NIB stuff
NIB pro-line hole shot rears
NIB pro-line “the edge” fronts
Package price is only $300 + actual UPS ground shipping
Paypal users, sorry add 3%
I will add the Starter box in the picture for $50 more; it comes with a 12volt gel cell
Almost just add fuel and go. You’ll want to add a decent steering servo if you plan to race.
The digital servo in the picture is already in another truck
I’ll even install the radio for you if you like
The only trade I will consider is a hyper7 pro or MBX5 kit
Maybe a NIB RB engine
Truck #2
Litely used Dominator extreme, Look at the pics closely, it's in great almost new condition,
I got it in a trade and I have to many cars to give this one the time it deserves.
It has the 2 speed diff installed.
Truck will come with the set of tires in the picture or a set of Bow-ties one white rims, you choose,
and a ofna header/pipe
I have clutch nut and bell for 2 speed.
You'll need the following to make it RTR
Flywheel, 2 speed clutch bell gears, shoes, springs,
Radio system of your chosing
Pull-start engine or regular engine and starter box.
Fuel, etc.
I also have a nice O.S. .21 RZ-V01B Engine the has a brand new piston/sleeve,
the engines crank has been cut for the 2 speed clutch set up, it is perfect for this truck.
Dominator Extreme roller $250 shipped
O.S. .21 RZ-V01B $150 shipped
$400 shipped for the package
First car: Ntc3 new
This car is just built, never raced
I installed a mt12 and was going to use the car in a regonal race but couldn't make the event after all. it was run for about 30 seconds just to test the gear mesh then put away
The car is flawless, not one scratch, the body still needs triming wing needs mounting
I've decided I just don't have time to get into on-road racing at this time
Included is
the kit as you see it
a brand new 1000ma battery
stock proline v-grove tire/wheels
4 pair of Jaco nitro shoes tires NIB (1-35shore 2-40shore, 1-45shore)
No servos or receiver that are shown in the picture
Email me for more pictures
$300 + shipping Firm for the package
Next truck: Factory team rc10gt
This truck has seen about 10 race days/nights and was always keep in great working order.
Not one broken or worn part on this truck
Parts were replaced when worn. It has the typical scratched etc,
The engine runs great and has good compression
This is a great race package for the new racer. I’ll only selling because I’m running a different factory truck
Package comes with:
RC10 gt Factory team kit
OS cvr .12 with rex pipe (2 gallons) and an extra piston/sleeve (used ½ gallon)
NIB Futaba Magnum Radio system
Hitec hs605 throttle/brake servo
New 1000ma receiver battery pack
Aluminum throttle/brake servo mount
Lunsford Ti turnbuckles
MIP 4-1 clutch, (New not yet run)
Aluminum MIP CVDs
Trinity receiver box
Lightly used hole-shots on yellow wheels
Like new pro-line edge front on yellow wheels
RPM ball cups/bumper
Body is a little beat up, but useable
New parts with only one race on them
New clutch bell, bearings, spur gear and slipper
New a-arms front and rear
New front axles
New steering servo mounts
Miscellaneous screws, parts, clutch shoes, etc. (new and used)
Extra NIB stuff
NIB pro-line hole shot rears
NIB pro-line “the edge” fronts
Package price is only $300 + actual UPS ground shipping
Paypal users, sorry add 3%
I will add the Starter box in the picture for $50 more; it comes with a 12volt gel cell
Almost just add fuel and go. You’ll want to add a decent steering servo if you plan to race.
The digital servo in the picture is already in another truck
I’ll even install the radio for you if you like
The only trade I will consider is a hyper7 pro or MBX5 kit
Maybe a NIB RB engine
Truck #2
Litely used Dominator extreme, Look at the pics closely, it's in great almost new condition,
I got it in a trade and I have to many cars to give this one the time it deserves.
It has the 2 speed diff installed.
Truck will come with the set of tires in the picture or a set of Bow-ties one white rims, you choose,
and a ofna header/pipe
I have clutch nut and bell for 2 speed.
You'll need the following to make it RTR
Flywheel, 2 speed clutch bell gears, shoes, springs,
Radio system of your chosing
Pull-start engine or regular engine and starter box.
Fuel, etc.
I also have a nice O.S. .21 RZ-V01B Engine the has a brand new piston/sleeve,
the engines crank has been cut for the 2 speed clutch set up, it is perfect for this truck.
Dominator Extreme roller $250 shipped
O.S. .21 RZ-V01B $150 shipped
$400 shipped for the package
Last edited: