StephMir
RCTalk Racer
I have the Kyosho Fazer MK2. I have upgraded to FOAM wheels, aluminum shocks, metal center drive shaft, metal center drive cups, Brushless 5200kv & ESC, metal wheel hubs, carbon fiber bumper support and front/back shock towers. On 3s LiPo with 36t pinion.
The car is pulling severely to the left when I punch it past half throttle. I can ramp up slowly but, I still feel the car wanting to pull to the left at full throttle. With all the upgrades and work put into it all at one time, this is something that I'm trying to figure out since I didn't test between upgrades/rebuilds. I have replaced wheel bearings. I have rebuilt front and rear differentials with 30k silicone diff fluid. Checked shock oils levels and springs. I am thinking my problem is with differentials and fluid weight. Anyone have experience with differential weight oil should be using for On-Road 4WD RC?
The car is pulling severely to the left when I punch it past half throttle. I can ramp up slowly but, I still feel the car wanting to pull to the left at full throttle. With all the upgrades and work put into it all at one time, this is something that I'm trying to figure out since I didn't test between upgrades/rebuilds. I have replaced wheel bearings. I have rebuilt front and rear differentials with 30k silicone diff fluid. Checked shock oils levels and springs. I am thinking my problem is with differentials and fluid weight. Anyone have experience with differential weight oil should be using for On-Road 4WD RC?