robboyeah
RC Newbie
- Messages
- 10
- Reaction score
- 0
- RC Driving Style
I'm trying to fit a kyosho 2 speed clutch bell to a thunder tiger pro21. The bearings on the t.t clutch bell are pretty standard but don't fit into the new longer kyosho 2 speed bell. Does anyone know the different dimensions of these two brands? Basically I need bearings that will fit a kyosho bell onto a t.t crank. I've already had to change flywheel to a 2 shoe as the 3 shoe on my eb4 is too big for the kyosho bell. Any help would be appreciated..:\
..it seems the bearing holes have a smaller diameter in the kyosho bell
..it seems the bearing holes have a smaller diameter in the kyosho bell
Last edited: