HPI Savage 3 speed transmission

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

WoodiE

Kind of good admin
Administrator
Messages
15,771
Reaction score
2,034
Location
Lexington, KY
RC Driving Style
  1. Bashing
Bolt in this completely pre-built HPI Savage 3 speed tranny and take your HPI Savage X to the next level! You get more punch and higher top speed, the best of both worlds! Faster track times, easier wheelies, blistering top speed, better fuel mileage, and lower engine temperatures are the result of the HPI 3 speed tranny, the ultimate HPI Savage upgrade.

Internally, the HPI Savage 3 speed tranny gearbox has been redesigned for extra durability and longer life. Hardened steel is used for many of the gears and hubs, stronger clutch mechanisms were developed...



Click to Continue
 

miketroll357

RCNT Qualifier
Messages
167
Reaction score
0
Location
Cary
RC Driving Style
So this will fit in the Savage 25 right? Thanks in advance...........
 

WoodiE

Kind of good admin
Administrator
Messages
15,771
Reaction score
2,034
Location
Lexington, KY
RC Driving Style
  1. Bashing
Yes, this fits all HPI Savage trucks!



-Michael
 

frickenjoey

Official RCNT Cyber-Bully
Supporter
Active Military
Messages
5,902
Reaction score
12
Location
Misawa-shi, Aomori, Japan
RC Driving Style
  1. Bashing
  2. Racing
I did a 3-speed upgrade on my 25 and it worked great. So I did my XSS too when I got it. Good upgrade.
 

miketroll357

RCNT Qualifier
Messages
167
Reaction score
0
Location
Cary
RC Driving Style
Looks like its time for another upgrade....Nitroghost is telling me its time. Thanks WoodiE
 

HeartBreak

RCNT VIP
Messages
5,090
Reaction score
0
Location
Anderson
RC Driving Style
  1. Bashing
  2. Racing
It's good to see HPI finally paired the 3 speed up with the X case; that's the only way to do the upgrade!
 

bentover

RCNT Addict
Messages
569
Reaction score
0
Location
Canada
RC Driving Style
But have they solved the problem of adjusting the 1-2 shift WITHOUT taking the tranny apart?
 

HeartBreak

RCNT VIP
Messages
5,090
Reaction score
0
Location
Anderson
RC Driving Style
  1. Bashing
  2. Racing
Nope, but they've at least compromised and included the X trans case, which basically allows you to take the trans apart in 6 screws.
 

frickenjoey

Official RCNT Cyber-Bully
Supporter
Active Military
Messages
5,902
Reaction score
12
Location
Misawa-shi, Aomori, Japan
RC Driving Style
  1. Bashing
  2. Racing
Basically you are correct. You still have to pull it all apart to adjust 2nd gear. However, with the X case you are not pulling to whole thing out like I have to do on my 25 just the top I am pretty sure. luckily I have not had to do it on my XSS yet. I have a new engine I am putting in......so I am sure I can tell you for sure soon.
 

bnrpat09

RCNT Qualifier
Messages
166
Reaction score
1
Location
Spring Valley
RC Driving Style
it is a great tranny and it does have a different ratio to put less stress on the car, drivetrain and motor, but my uncle had to do ALOT of tuning on the tranny to get it to shift right

get it dont get me wrong
but be prepared for tuning the tranny
 

HeartBreak

RCNT VIP
Messages
5,090
Reaction score
0
Location
Anderson
RC Driving Style
  1. Bashing
  2. Racing
Very nice! Thanks for the news Woodie. I wonder if it'll fit the X case?
 

Timbo

RCNT Basher
Messages
61
Reaction score
0
Location
Goodyear
RC Driving Style
anyone no what the shift point setting for the 3speed trans for k4.6
 

Similar threads

MCNITRO
Replies
3
Views
962
STONER RC
STONER RC
Defiant
Replies
40
Views
2K
coldvod
coldvod
olds97_lss
Replies
1
Views
2K
olds97_lss
olds97_lss
olds97_lss
Replies
21
Views
7K
olds97_lss
olds97_lss
Scalded-dog
Replies
6
Views
1K
Scalded-dog
Scalded-dog
Top