monster truck

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

  1. Glitch

    Ground clearance AND stability?

    My sister is looking into joining the hobby and she was thinking of getting something that allows her to do large jumps, mud, etc. She said she would like something with a little more ground clearance than my Vorteks so I immediately started looking at other arrma trucks (love the vorteks) but...
  2. Guy219

    My project builds

    New to the form. I'm currently doing a long shock conversation on my slash 4x4, a 100% metal trans on my sc10, finishing up my associated b5m, building a speed run buggy out of my duratrax evader, blowing off the dust on my Clodburster. Been sitting sense 1999. And a buddy gave me a first gen...
  3. Disappointed Denver

    PLEASE!! Help find large monster truck like The Carnivore!

    Sorry if I'm doing things wrong, this is my first time on a forum I have been trying for years to find an rc car like my beloved Carnivore (Radio Shack), only faster and longer battery life. I tried to get another 1/10 scale "monster truck" but its was half the size! I'm afraid what I'm looking...
  4. >BD

    Who else has a Clodbuster.

    Here is mine.
  5. WoodiE

    My new Losi LMT monster truck

    Just picked me up a new Losi LMT Grave Digger monster truck yesterday and already took it out for a quick ride. I can tell this thing is going to be a blast. The Losi LMT also moves pretty good on the stock electronics. For now, it's completely stock.
  6. beason

    What is it worth??

    I have this nitro monnster truck, and I'm wondering what its worth. I THINK its a vintage kyosho nitro usa-1 crusher, but I'm not 100% on that. Everything seems to be in good working order mechanically, and in good shape visually. I think its been sitting for quite a while, because the engine...
  7. Knight999

    Rival MT10 servo upgrade

    Just brought an mt10 Rival only been out with it twice and the cogs in the servo are damaged it's a reedy 15kg should I replace with the same one or are they known for being poor any advice would be much appreciated ?
  8. W

    Losi LMT stand

    Does anyone know of a good stable stand for the Losi LMT truck that doesn't compress the shocks?
  9. N3st087

    X-factor restoration almost complete

    I started out restoring this bad boy after pulling it out of my storage. I had it sitting for 14 years plus. Just waiting to get an engine since the old one was blown out. Anyone have a good idea on what size to go with.
  10. C

    Losi LMT measurement

    Does anyone know the measurement on the two holes by the shock I want to put on limiting straps
  11. Abe559

    Corally dementor need some advice

    I wanted to.know what battery would you suggest on a team corally dementor 2s-6s capable esc is 180amps now it's not just choosing the highest 6s battery correct? If I were to try saying a 6s 5000mah 90c rated battery my esc would cut out right due to over amperage. I'm new to this rc world but...
  12. R

    Hobby King Nitro Circus monster truck issue

    I have a Hobby King Nitro Circus monster truck 1/8th scale that lives up to its name and gets bashed. But recently all of a sudden I have steering but no throttle and no noise at the motor and the ESC is blinking all kinds of different lights and codes I cannot figure out for the life of me...
  13. D

    Can't identify my offroad chassis :/

    I just bought this awd 1/8 scale chassis and I can't identify it to order missing parts. Its missing its front and rear drive shaft, upper support plate that holds down the center diff, servo mount etc. There are no brands or writing on it whatsoever. Anyone know what it is? Excuse the clothing...
  14. B

    Nitro HPI MT2 with g3.0 motor

    So I have a Nitro Hpi mt2 with the newer g3.0 motor. I got it thru a trade and at first it was running great. Then I somehow stripped the rear dif gears. I ordered parts for it. Right now i just switched the rear and the front diffs so i have a rwd instead of awd. Now when I start it, I can get...
  15. M

    Adjusting shocks on a Redcat Blackout xte pro

    How do you adjust the shock to run over a rough grass covered lawn. Should the shocks be stiff?
  16. D3MON

    Getting back to running MGT 4.6

    well, on the road to getting my associated MGT 4.6 back to running, and in working order after some years of not running it. and re learning what was wrong when i had to leave it in storage (really wishing i had been able to fix everything beforehand instead of having to learn what was wrong...
  17. gsbuickman

    New to me Traxxas Summit

    Hiya Guy's :D . About 4 years ago I made the mistake of letting a good friend talk me out of my Traxxas Summit that I had upgraded with the DeWalt motor on 4s with nice Pro-Line wheels & Trencher tires and I've been kicking myself in the proverbial but for letting it go ever since. I didn't...
  18. J

    HPI Bullet or other RC?

    How’s it going everyone! I’m new to the hobby and was looking for advice or reccomendations on which RC I should start with. I’m looking for nitro, something with a good selection of upgrades later on, and something that can hold up to some good fun. I did my research and ordered the Nitro HPI...
  19. J

    Any way to crawl at slow speeds

    Hi All! I just got an X-Maxx to use for some non-standard use. I want to be able to drive at very slow speeds. Out of the box, the minimum speed is too fast. I'm running the vehicle in 4S, training mode and have ordered an 11-tooth pinion gear. Is there anything else I can do, to make the rc...
  20. WoodiE

    Arrma Granite & Senton 4x4's get brushless upgrades

    Continue reading the Original Blog Post.
Back
Top