-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
Bigger is BETTER (The Sequel)
- Thread starter Rolex
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #122
Okay, took a little break and now I have the latest update. More of a Re-do than a New-do, but now I really like it. I had to disassemble the suspension to start the brass frame and while it was torn down I did the repaint and some tweaking.
Last edited:
Alexander_0_1
"Roads, where we're going we don't need roads"
I'm digging those pushrods, if I had a 1/10 revo I'd want those.
ninnon
Hardcore RCTalk User
This really is looking nice, can't wait to see it finished.
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #125
The springs serve no purpose whatsoever, other than to mimic the look that's under the real HummVee.
ninnon
Hardcore RCTalk User
Didn't even notice those, they look good.
- Messages
- 9,789
- Reaction score
- 5,686
- Points
- 2,315
- Location
- Great Smoky Mountains
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
Nice work Ralph!
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #128
I'll have some pics up later but it's been another total tear down of the front and rear suspension. The A-arms are not the standard length that I used on the first HummVee but are from the new extended PRO Slayer and make the suspension 26mm wider. Well, that doesn't allow the tires to fit under the body so I've been cutting off the extended portion of all 8 A-arms, drilling them deeper and tapping them out for the pivot balls.
Both model Slayers are now discontinued, so if I ever do a 3rd HummVee it will really be a challenge.
Needless to say, the toe links were also too long so I'm also cutting and re-threading them to fit the narrower version.
I've now finished the first rear corner and everything worked out perfectly. Now that I know what's required, the rest might go a little quicker.
Both model Slayers are now discontinued, so if I ever do a 3rd HummVee it will really be a challenge.
Needless to say, the toe links were also too long so I'm also cutting and re-threading them to fit the narrower version.
I've now finished the first rear corner and everything worked out perfectly. Now that I know what's required, the rest might go a little quicker.
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #129
So, here's the first rear corner with both A-arms cut down, drilled and tapped for the pivot balls and the toe link cut and re-threaded.
The adjustment hex used to be centered so you can see how much had to be cut off.
Something just didn't look right on the front so I made another change. I haven't cut the front A-arms to size yet, but this change has no effect on the length. This is what I got...BIG springs, epoxied a small washer to a big one, ground the spring ends flat and mounted it on the suspension rocker push rod.
It went from what you see on the left, to what you see on the right. MUCH more to scale with what's on the real thing.
I had to grind away a bit of the A-arm to clear the wider top of the rocker arm, but I like the look. It's strictly for the look as the springs are on the rocker arms going to the Revo shocks on top.
Still have to cut down these A-arms so I'll clean this up and repaint it when they're off. I just had to do this modification since the front springs are so obvious on the real one.
This is the look I needed to get. I'll also be doing this mod on the other HummVee.
The adjustment hex used to be centered so you can see how much had to be cut off.
Something just didn't look right on the front so I made another change. I haven't cut the front A-arms to size yet, but this change has no effect on the length. This is what I got...BIG springs, epoxied a small washer to a big one, ground the spring ends flat and mounted it on the suspension rocker push rod.
It went from what you see on the left, to what you see on the right. MUCH more to scale with what's on the real thing.
I had to grind away a bit of the A-arm to clear the wider top of the rocker arm, but I like the look. It's strictly for the look as the springs are on the rocker arms going to the Revo shocks on top.
Still have to cut down these A-arms so I'll clean this up and repaint it when they're off. I just had to do this modification since the front springs are so obvious on the real one.
This is the look I needed to get. I'll also be doing this mod on the other HummVee.
- Messages
- 19,394
- Reaction score
- 909
- Points
- 2,075
- Location
- Central Florida
- RC Driving Style
- Bashing
- Racing
The bigger spring looks much better.
- Messages
- 9,789
- Reaction score
- 5,686
- Points
- 2,315
- Location
- Great Smoky Mountains
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Flying
Agreed, much closer to the real thing.
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #132
Here's the other HummVee, and as cool as I thought those springs were at the time, this one will also be going with the big ones. https://www.rcnitrotalk.com/forum/threads/size-matters-update-pg-13-post-302.69239/
Last edited:
Incredible work, they look great, great detail on them and nice job on the 50cal mount.
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #134
Thanks, @Nitro4910
The first big Humm Vee was a challenge. This one's a labor of love. So far I'm really happy with it. I've had to put it on hold for a while, but I hope to get back to it in another week or two. It just sits there calling to me.
The first big Humm Vee was a challenge. This one's a labor of love. So far I'm really happy with it. I've had to put it on hold for a while, but I hope to get back to it in another week or two. It just sits there calling to me.
Man I wish I had your patience! Your attention to detail is second to none.
ninnon
Hardcore RCTalk User
I haven't ever seen any working model RC with as much detail as this. Great job.
wacmartin
DAMN TREES
"Working"? We all know this will never do any "working" as long as it belongs to Rolex!
She is a beauty though!
She is a beauty though!
- Messages
- 35,104
- Reaction score
- 1,854
- Points
- 2,198
- Location
- In my recliner
- RC Driving Style
- Bashing
- Flying
- Thread starter
- #138
Speaking of "Working", I'm working on a bigger shelf.
cbaker65
RCTalk VIP
Warrior4Jesus
RCTalk Racer
- Messages
- 92
- Reaction score
- 6
- Points
- 75
Where is this at now? AMAZING! I'm sitting here saying wait wait there has to be more.
