exhaust

I recently purchased a revo with a Picco .26 red dot engine installed. When I started it up I noticed it was very loud. I looked and saw the exhaust manifold that is on there wasn't screwed to the engine. It was held in place with a spring which hooked on the manifold on two sides and went...

does this thing really work? what does it do? http://www.integy.com/st_prod.html?p_prodid=7486&p_catid=3

does any on one the best dynamite exhaust there is i have heard that there exhausts are pretty good and is also reasonable since I'm getting a dynamite engine but not sure what exhaust models are the best? thanks!

hey everyone! I'm new to rc talk. so hello! Anyway i need help, the gasket between the exhaust manifold and the engine keeps breaking after a run through a few tanks. i know theyre fragile and made of like something simular to paper but they shouldnt break this quickly. any suggestions?? I've...

Recomended exhaust? I was looking at the RD twin exhaust, seems like it's more for show though and less for performance, but...i don't know since I'm still pretty new to owning a savage. So any sugestions? Anyone running the THS pipe or RD rear exhaust pipe? P.S sorry for asking so many...

hey everyone, happy late fathers day to all the fathers here. i was wondering, you know how the exhaust pipe on nitro cars lets out that oily substance. I'm assuming it's like the residue from the nitro fuel. but anyway i was watching many videos on youtube, and had a question. i came across...

So I've recently purchased the dual exhaust for my tmaxx 3.3 and without any tuning after puting the new exhaust on it seems as soon as it shifts into second gear i lose all power. If I slowly increase throttle to full it seems to accelerate just fine but when i accelerate full throttle from the...

Howdy folks! Does anybody know of a cheap way to replace the 'short length' coupler that came with my TMaxx 3.3 with a longer one? I had to move the pipe forward a few cm, so now I need a longer exhaust coupler. I don't know where to find a longer one that will fit this pipe and header. Thanks!

Well everyone, I've been kicking around the idea of putting a cat-back exhaust on my corvette.. I really want to bring out the sound of that LT1 engine.. something that will make it sound mean, but not wake up the dead. Has anyone tinkered with their own rides to get a little more rumble from a...

On the pipes i had over the years that did not come with a fuel nipple installed on the pipes i've added one to them using jb weld and a fuel nipple. I feel that for the 6 or so dollars to install a nipple and the security of the air line not falling off, it's worth my time. When i went to my...

Somehow, I developed a crack/split in the L-shaped rubber tube that runs between the motor exhaust and the muffler. It affected the running of the car. Engine ran poorly and would not idle well or respond to full throttle command. Being as it was a Sunday, there was no running to the LHS. For...

ok gonna be swapping out my .15 pro on my maxx next week to an OS.18. Now would my header and pipe from the .15 fit right up, or is that something extra i will have to purchase?....thanks

Ok i am getting my engine back from traxxas on Fri.. which they replaced free cuz i fried the first one. One of my questions is do i seal the ez start where it meets the motor? The second question is what is a good rear facing exhaust ? doesn't have to be dual.. Just rear facing. I read of Tsais...

Pull start RS4 3 ONLY gets fuel to engine when I put my finger partly or fully over exhaust exit hole. I've checked for obvious air/fuel leaks in fuel lines and exhaust and put pressure on fuel tank top/cap when starting and nothing. Fuel filter is clean. Maybe the pipe I have on here is...

want to buy a full exhaust for .21 engine....gettin ready to put one on the tmaxx just need the exhaust now....n e body got n e wantin to get rid of for free or cheap???

hello all of you savage guys or anyone who knows anything about savage. I recently took my savage out for the first time in months. it started up fine and all but after i ran it i noticed that my exhaust pipe had a crack in it right next to the vacuum hose that attaches to it. i notice that the...

I've seen thes extendin exhaust tip whats the real gains from it? and I've ben thinkin about a supercharger and noz injection and force fed fueling? whats your thoughts?

I have an original tmaxx with some nice upgrades on it. I recently got back into the hobby so i replaced the os 12 i had in it for an os 18 cvrx. I kept the mip stinger exhaust and it runs pretty good. As we're all aware of in this hobby if we go faster or longer we're all over it. My...

I'm new to nitro and just got my first t-maxx 3.3 I was interested in getting an Integy dual tuned pipe.However i have read and was wondering if it is true that the dual pipes make the engine not have enough back pressure and will miss at higher RPM's, aswell as have a hard time starting. I...

Hey all, I had issue with my OS and the exhaust manifold springs. Basically it is eating gaskets like crazy, and tends to move, hence reducing pressure in lines and creating "temp surges" because of starving. I did a second set of holes in the manifold, installed a second spring...