joshman1204
RCTalk Addict
- Messages
- 533
- Reaction score
- 3
- RC Driving Style
My 3.3 has been running great for almost 4 gallons and over the last few tanks I have been having a hard time tuning it. Well finally today after inspecting everything and wanting to pull my hair out I noticed that while it is running the LSN is moving around. I set the needle to where the slot it completely horizontal and ran it for about 2-3 minutes and when I brought it back in the needle had moved almost a full 1/4 turn.
I pulled the carb apart and noticed that the LSN was very loose when I was removing it and also after I reinstalled it. I did not notice anything obvious wrong and it appeared that all orings were still in place. What could be causing this?
I pulled the carb apart and noticed that the LSN was very loose when I was removing it and also after I reinstalled it. I did not notice anything obvious wrong and it appeared that all orings were still in place. What could be causing this?