slowngreen
Robmob is a Californian.
Staff member
Supporter
Excellence Award
I've been thinking about it for a long time now and finally decided to do it today.
Using a Ultimate berg clocker from a member on rcc.
Going 30 degrees on the rear axle and 20 on the front.
heres the rear.
Unclocked axle and fixture
Fixture in place, with my mismatched screws
Drilled the new holes at 30*
Tapped it.
And heres the finished 30* clock on the rear axle
Using a Ultimate berg clocker from a member on rcc.
Going 30 degrees on the rear axle and 20 on the front.
heres the rear.
Unclocked axle and fixture
Fixture in place, with my mismatched screws
Drilled the new holes at 30*
Tapped it.
And heres the finished 30* clock on the rear axle