So she is my very first Hobby grade RC. I got her during the pandemic to cope with the crazy life that was happening around us all. Of course, she was a stock rtr new out of the box. I was 1 of the not so lucky...servo trashed 1st day. Followed by some advice that I shoulda passed on lol. And multiple newb mistakes. I finally am getting close to what I was hoping it would be.
So we'll start with whats on her now.
Proline badlands 2.8unbelted.
Hr pivot balls
Hr servo saver/aluminum arm
Granite front bumper
25kg amazon servo
Front shocks are rear stock
Rear are 115mm ZD Racing (Wanted the jacked up truck look)
3d printed roof skids/nose plate
4s roll bar
Custom decals
12mm hex (going to 17mm)
Typhon mega wing/mount
Hr motor mount (m2c hopefully soon)
Stock motor and wax (want to run 4s on low temp).
Will update as I upgrade. Getting a new slipper assembly from Jennys RC.com Friday. Then back up and running.
Heres this
So we'll start with whats on her now.
Proline badlands 2.8unbelted.
Hr pivot balls
Hr servo saver/aluminum arm
Granite front bumper
25kg amazon servo
Front shocks are rear stock
Rear are 115mm ZD Racing (Wanted the jacked up truck look)
3d printed roof skids/nose plate
4s roll bar
Custom decals
12mm hex (going to 17mm)
Typhon mega wing/mount
Hr motor mount (m2c hopefully soon)
Stock motor and wax (want to run 4s on low temp).
Will update as I upgrade. Getting a new slipper assembly from Jennys RC.com Friday. Then back up and running.
Heres this
Attachments
Last edited: