Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Will it still bolt up. I can get the chassis braces n center driveshafts ?Center diff mounting is different. Also front and rear chassis braces.
Thanks a lot @E-fanatic ????Center driveshafts are the same. It's the motor mount and center diff mount screw locations that are different. So it wont bolt up. You would need to drill your own holes in the new chassis or buy the center motor/diff mount from a 3.0
Thank ya sir!Just one set is all you need. They add stiffness to the rear diff case.
What was your shimming like with the provided shims in the tlr3100 aluminum cup set?Just one set is all you need. They add stiffness to the rear diff case.
Thanks again. Sounds like I'm going to have to do a bit more research, as I'm not sure where the tlr3100 inserts would go? I can't see a similar part in my diff breakdown.The tenacity pro has hd style diff housing stock. It has the slots for the metal inserts that the planetary gear pins ride on so that the pins don't wear out the housing/cup.
You sir are the man.The metal diff inserts do over the diff bearings and line up in the rear diff case. Its what sets the rear diff into the case
I'm on it now!The stock shimming was perfect on mine with the 3100s.
I use grease in the gears to see how well my gear alignment is. Pack the diff gear teeth with grease and set diff in the diff case. Spin diff and see how the pinion gear meshed with how it smashed the grease on the diff gear.
Loving the DB Pro. As many have pointed out, the stock servo lacks punch to say the least.I'm on it now!
Cheers ??
Good question. Any chance you can physically measure the stock one and follow those dims?Loving the DB Pro. As many have pointed out, the stock servo lacks punch to say the least.
I'm looking at getting an upgraded servo and want to go waterproof.
I'd like to get this Savox:
https://www.savoxusa.com/products/savsw1210sg-waterproof-coreless-digital
It is listed as "standard" size but seems really tall at 42mm and 29.2mm to where the screw lugs mount.
Will this fit the db? Seems the stock servo is shorter. Any recommendations on a different water proof servo that falls more in the "standard" sizing?
Thanks!