• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

WoodiE if you had $300.00 for R/C What would you do?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Ok WoodiE make your decision. Pick the parts you want the equal up to 300 bucks. And we well get them for you.

A few elite member here put together a fund for you to hook your ride up. Hope your happy!
 
jon2 said:
Lets just cut this topic here and not get this into another bash thread on how much the site makes. Its been spoken about and there is no need to ruin a thread meant for Woodie and his MGT.


Jon2
RCNT Staff

Come on Jon, I can't be the only one who knew plaidfish was makin a funny.
 
Buncrana said:
Come on Jon, I can't be the only one who knew plaidfish was makin a funny.
I did but lately too many things pop up un-noticed and addressed that someone can come and completely derail a thread and start talking cost of the site.

I know you remembered that one. :smoke:

It was mainly directed to the newer members.

Plaidfish and Pierow are cool peoples to me. :cheers:


So Woodie DECIDE!!!!!
 
Happy Birthday Woodie.... :cheers:
It's not every day you get something like this..Enjoy bro!
 
If anyone would like to donate that didn't no this was going on you can PM me.
PICK DAMNIT. And only can be used for R/C's!
 
and the winner of the rcnt faithfull lotto is........






woodie!! ...congrats no one here deserves it more
so what cha gonna get??
 
jon2 said:
Are you going to keep the mill or opt for a different one?

As of right now the MGT is pretty much in kit form. The mill hasn't even had fuel within 5ft of it. The mill and electronics both are going up for sale as I do plan on putting a bigger engine into the MGT.


robmob said:
WoodiE, you should consider a set of RC Solutions Spring Steel Bumpers/Skids.

Sorry I didn't have a chance to consider it, Scott already sent me set of them as well as a roll cage for the MGT. I can't wait to have this truck done as I'm going to have some pretty good reviews on the parts I'm using, more so the roll cage for the MGT - some interesting pictures too.


PiErow said:
I highly dout woodie makes money from the site. What we give him goes dirrectly to the site. I think anyways...

You doubt wrong, I make anywhere from the high five figures to low six figures each month from this site. :ahem:


jon2 said:
Lets just cut this topic here and not get this into another bash thread on how much the site makes. Its been spoken about and there is no need to ruin a thread meant for Woodie and his MGT.
Jon2
RCNT Staff

Nicely said, back to the topic.


Mayhem said:
Ok WoodiE make your decision. Pick the parts you want the equal up to 300 bucks. And we well get them for you.

A few elite member here put together a fund for you to hook your ride up. Hope your happy!

Mayhem are you kidding me? This is by far one of the nicest things anyone has done when it comes to this site. Far and beyond anything I could have ever expected - I'm truely speechless. The only thing I know what to say right now is THANK YOU! I just don't know what to say, it's not everyday someone comes up to me and says "here's $300 go buy more R/C stuff", I'm in shock and disbelief right now. Mayhem and everyone else that's put up their own cash for this - Thank you!


olds97_lss said:
Can you get a monkey for $300? If so, that's what I want!

Funny you say that - I've always wanted a spider monkey, to bad they cost like $3,000-4,000. :(


ZANDOR said:
Happy Birthday Woodie.... :cheers:
It's not every day you get something like this..Enjoy bro!

My birthday isn't even until June, but I'll take this. Thanks guys!


ZANDOR said:
Dam some one call him and tell him he Won :winnar:

Haha, sorry I worked 7a-10:30p lastnight and after work went right to bed. Kinda wears you out when you work 60hrs a week know what I mean :)



I'm still trying to think what to say about this money you guys are giving me, I just don't know what to say other then Thank you. Maybe it's because I just woke up, but I'm still shocked and amazed about this, I just can't believe it. Thank you so very much guys!


-Michael
 
Geez, with all these tears you'd think it's the Miss America pageant for God's sake. Just pick out the crap you want and be done with it!

Actually, all kidding aside. WoodiE, you've given us one hell of a forum to chill at. Somehow managed to attract a mass of cool people. A huge body of knowlege. And a lot of fun. I think I can speak for everyone else who donated when we say Thank You. For all you've given us, it's the least we can do for you.
 
Ok Woodie enough sobbing! I would also like to thank some people for helping this happen!

-Candyman
-robriquez
-robmob
-CorradoPsi
-Hypedonrc
-sweetdiesel
-retarded pilot
-itsmesag1
-lykan
-kwong2001
-humboltblazer
-ZANDOR
-Jon2

From $10 to $50 everyone of these people made it happen. Remember its never to late to pitch in!
 
Well this is what I think I'm gonna get then...

Prices are from RushRC.com:

RPM black a-arms (RPM70042)
RPM black carriers (RPM80032)
AE Steering kit (ASC25395)
AE Forward kit (ASC25415)
Pro-line 23mm wheel hex (PRO603400)
Pro-line 23mm 40's wheels (PRO267901)
Pro-line MOAB 40's (PRO111700)


Now if I'm not mistaken that is about $295, when these are ordered let me know the difference and I'll GLADLY pay shipping charges. RushRC has my address if you order from him.

Again, to everyone on that list - thank you guys very much. I still can't believe you guys did this. Thank you so much, I really do appreciate this and something I won't ever forget. You can bet this is going to be one R/C that I'll never get rid of.


-Michael
 
Rush is hookin us up too at cost!
 
It's our way of saying thank you WoodiE. We all know how much of your time and money has went into creating this site. It is time we gave something to you, for you.

Thanks.
 
Woodie Its all good you have provided us with a great place to hang out..
Thats thanks enouff for me...Now build that dam truck so we can see some pics of it for christ sakes GETER DONE!!!!!
 
just a way to say thanks for providing a place to chill, talk rc's, and harrass some buddies.
 
Woodie, you earned this small token of appreciation. If you ever make it back to NY, we'll make up for the last trip since we didn't meet. I'm gonna start looking for a new spot.

When I make it down to Louisville, I know that it's not that far from Lexington so we'll have some opportunities then to "have some coffe at another Cafe." I'll be there soon enough, dollar bills and nitro in hand. :devious:
 
Yes WoodiE you did earn it, Now only if I could get Bruce to PM me back
 
You guys have it all wrong, without each of you this place wouldn't be what it is today. All I had was the want for something different then what was available, you guys are the ones that made it happen.

I still can't believe you guys did this, it's unbelievable - thank you! Now I can't wait to get all my new stuff, but then again I've now got a LOT of things to do reviews on. :D



-Michael
 
Back
Top