Who was wrenching today??? What did you do??

[CJSRCLIFE]

Soldering day.
View attachment 227319

That's sweet looking, I was thinking about doing something like this someday to use with GA D300 charger instead of my old Amazon special charger i've used for year before the D300.

 

[CertifiedMike]

pit board, yes. Sorry for the frustration, I just want to give up at this point. I'm tired of having issues every time I try to order something the last few months.

I think you are well right to be frustrated at this point. I would likely have lit a fire in the pit just for that wrap!
Sometimes you gotta guide every step to make a thing happen. And now your bank issue is worked thru too. Better days ahead!

 

[Willy0942]

I’ve had it with these stupid wraps and wasting money. I am never buying a wrap again. Once again another screw up. I crumpled it out of anger.
View attachment 227318

Ok I have never used these and was wandering, do they use water to stick them on, or is it just a sticker.

 

[Willy0942]

pit board, yes. Sorry for the frustration, I just want to give up at this point. I'm tired of having issues every time I try to order something the last few months.

Just in one of those down spouts in rc, believe me it will get better, I go through it time to time. Lol

 

[Serea71]

instead of fussing with wraps I just made and applied a couple stickers and calling it good. I made them small enough so they wouldn’t interfere with checking ride height.

 

[WickedFog]

instead of fussing with wraps I just made and applied a couple stickers and calling it good. I made them small enough so they wouldn’t interfere with checking ride height.


View attachment 227341

That looks killer!

 

[Doom!]

Soldering day.
View attachment 227319

Those are some fancy earbuds you got there!

 

[WickedFog]

Those are some fancy earbuds you got there!

Yeah they are. Unfortunately the reception is terrible But I feel recharged after wearing them for a bit

 

[Serea71]

Well I thought it over yet again and forgot I had Realtree camo wrap since my car will have Realtree logos on it so I just used that. Probably a better option anyways since I didn’t have to get it perfectly aligned. I still need to trim off the excess though.

 

[Doom!]

Well I thought it over yet again and forgot I had Realtree camo wrap since my car will have Realtree logos on it so I just used that. Probably a better option anyways since I didn’t have to get it perfectly aligned. I still need to trim off the excess though.

View attachment 227349
View attachment 227350

View attachment 227351

Just don't set any screws down or you'll never find them!

 

[Tunedfrog]

Mounted the elevator to the jet almost looks too small.
So far I'm not impressed with the whole project.

 

[Willy0942]

Just don't set any screws down or you'll never find them!

Paint them hunter orange you’ll be ok

 

[Serea71]

Just don't set any screws down or you'll never find them!

Haha all good there! I picked up one of these not too long ago. It has like this silicon that pops up into a bowl, and can be split into 2 trays. Magnetic too of course.

 

[Serea71]

Got the excess vinyl removed from the edges, I just used an exact knife with a new blade which is important, and guided the blade against the edge. all done finally looks good. I might put some logo stickers on the lower corners I don’t know yet.

 

[CertifiedMike]

Got the excess vinyl removed from the edges, I just used an exact knife with a new blade which is important, and guided the blade against the edge. all done finally looks good. I might put some logo stickers on the lower corners I don’t know yet.

View attachment 227396

For all your troubles, it looks great!

 

[CJSRCLIFE]

For all your troubles, it looks great!

Hi have you seen my albums and new posts i did? Yeah that pit mat looked cool i was thinking about an Arrma or Spektrum iXSR one someday.

 

[CertifiedMike]

Hi have you seen my albums and new posts i did? Yeah that pit mat looked cool i was thinking about an Arrma or Spektrum iXSR one someday.

Hi!
I have seen a few of your newer ones but I'll have a look again to be sure I've got to them all. You've been pretty busy posting over there with all your new electronics and repair work!
I think a Spektrum board or pit mat would be very fitting for you! It will match your new fancy radio!

 

[CJSRCLIFE]

I'm glad it took me awhile to post them since i had resize them since they were over what this site recommends for pic sizes. And i have been really busy i ran my Felony yesterday since i hadn't run it in awhile since the ESC and motor swap although i had to recalibrate the Max 6 but after i did that no other issues happened.

And yeah i think a work mat would be nice since my poor table gets pretty beat up from my work. It used to be my Mom's sewing tables before our fire i also had another table i saved that is now an aux work table. Yes i think a Spektrum one would be nice to match my new expensive fancy radio i hope to get later this year.

 

[CertifiedMike]

I'm glad it took me awhile to post them since i had resize them since they were over what this site recommends for pic sizes. And i have been really busy i ran my Felony yesterday since i hadn't run it in awhile since the ESC and motor swap although i had to recalibrate the Max 6 but after i did that no other issues happened.

And yeah i think a work mat would be nice since my poor table gets pretty beat up from my work. It used to be my Mom's sewing tables before our fire i also had another table i saved that is now an aux work table. Yes i think a Spektrum one would be nice to match my new expensive fancy radio i hope to get later this year.

I put a couple bad marks on my kitchen table too. Mrs Certified doesn't know yet. She thinks I'm just a messy worker... can't see the table top at all!!! But there's a method to my mess!!!
I'm looking forward to RCTALK.COM pit mats!!!
A nice board would be cool too. I keep looking for a cheap or free drafting table on craigslist for my rc work and pics.
I really need to move all my rc stuff to one place and then organize. Basement seems most likely but we got water in there 2 years ago.
I put up gutters and no water so far.

I wouldn't call it 'wrenching' but I've been waiting for a delivery. I must have checked the doorway about 30 times already!!!

 

[CJSRCLIFE]

I put a couple bad marks on my kitchen table too. Mrs Certified doesn't know yet. She thinks I'm just a messy worker... can't see the table top at all!!! But there's a method to my mess!!!
I'm looking forward to RCTALK.COM pit mats!!!
A nice board would be cool too. I keep looking for a cheap or free drafting table on craigslist for my rc work and pics.
I really need to move all my rc stuff to one place and then organize. Basement seems most likely but we got water in there 2 years ago.
I put up gutters and no water so far.

I wouldn't call it 'wrenching' but I've been waiting for a delivery. I must have checked the doorway about 30 times already!!!

I can see that, I hope to get a pit mat someday i'm just not sure when i also had ideas for bigger car stands like the one Traxxas makes for the X-Maxx\XRT. I also found out that the radio i want is currently on backorder at some places but it's okay cus i still need to save up money for it. And hopefully they'll be in stock when i'm ready to buy mine.