Caleb90
RCTalk Talkaholic
So my brand new sketers esc went up in smoke. Long story short, i never tested it new out of box as i don't have any xt90 plugged batteries. So tonight i soldered on ec5 plugs with a jumper as i don't have any single 4s packs. Only have 2s 3s and 6s. Got every thing done and plugged in a 2s lipo. Esc turned on as it should counted the cells then smoke came out and shorted. Every thing was good on my end. Hopfully corally will help, but i wont be supprised if they don't. Pretty bumbed wanted to run it tmr