DX3 Radio and a LST2

[rdr4evr69]

Anyone use a DX3 with their LST2???
Do you have to hold the switch to use reverse???
or is there a way to make it stay????
Thanks,
Rdr...... MY first post!!!!!!! New to this forum, not RC.

 

[jon2]

Well it engages when you hit the 3rd channel switch. When you are done, hit again. If you are seeing it try to disengage it and it does not and you are stuck in reverse. Check your linkages first. Your linkage, is the first thing to try out.

 

[rdr4evr69]

Do you have a dx3, not 3.0? and a lst2?
My linkage is fine....If you dont have or know the DX3 and an LS2 it is hard to answer. It worked perfect with my xs3, stock radio. Exactly as you stated it should. the Dx3 radio is different. I have to hold the ch3 to stay in rev. Just wondering if there is any way to change this???
Thanks for the help though!!!!
Rdr....

 

[alpinehyperlite]

I have the DX-3 and no you are not supposed to have to hold the ch3 button to go into reverse. It should be tap, reverse, tap again, forward.