Can I use the stock one?

[TWOCANE]

The wheels that came on my ofna ultra lx comp fit some bigger shoes? or do you have to get the wheels and tires? I want that truggy stance.

 

[Scrogg]

You'll need the extended wheel hubs. Ofna makes them. Edit; You will need wheels and tires. You might could get away with just a set of the Ofna truggy wheels, they are a full one inch offset.

 

[TWOCANE]

I need front knuckles I broke the front right one. Who makes better than stock ones?

 

[Scrogg]

Ofna makes a lot of al. hop-ups. I am sure they make an al. knuckle. This is one of the few parts I would suggest using al. on.

 

[psunitro]

Guess you dont want the Panther LP's? They will work w/o the wheel extenders. OR you can get the Ofna 15mm or 30mm extenders.
No, you can't put larger tires on standard buggy rims. You can use the full offset Ofna rims with your choice of tires as stated with or without the extenders.

Here are 12mm, they may not have the larger ones anymore
http://cgi.ebay.com/Ofna-1-8th-Scal...ryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Here are some of the wheels
http://www.nitrohouse.com/catalog/product_info.php?cPath=37_142_153&products_id=13902

 

[TWOCANE]

I got the jammin knuckles and they were for the first generation and I have a two, so the 3mm screw wont fit. Now ofna said I need a 34006 but I got the
http://cgi.ebay.com/ws/eBayISAPI.dl...0271690569&ssPageName=STRK:MEWN:IT&ih=017what do you think??
Thanks

 

[TWOCANE]

It is not that I do not want them, I can't afford them.

Guess you dont want the Panther LP's? They will work w/o the wheel extenders. OR you can get the Ofna 15mm or 30mm extenders.
No, you can't put larger tires on standard buggy rims. You can use the full offset Ofna rims with your choice of tires as stated with or without the extenders.

Here are 12mm, they may not have the larger ones anymore
http://cgi.ebay.com/Ofna-1-8th-Scal...ryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Here are some of the wheels
http://www.nitrohouse.com/catalog/product_info.php?cPath=37_142_153&products_id=13902

I broke the knuckles and the upgrade part is 50.00. The stock rart is aluminum, but more like pot metal.

 

[psunitro]

Yup, the stock is just cast, and the upgrade is CNC'd