wont start..

[tannerhall4e]

can someone help me ... my nitro wont start for anything its a new engine... just broken in... perfect glow plug... fully charged ignitor batteries are perfect and the needles are at stock setting... someone please help me... also i primed it perfect

 

[Rolex]

It's probably too rich. Lean the LSN 1/8 turn in and try that.

 

[tannerhall4e]

ohh when it wasn't starting i was richening the LSN thats prob why

 

[Rolex]

It was already factory rich for the break in.

 

[tannerhall4e]

need help !!!!

hey guys i really need help this is my 3rd post about this and nothing helped! i can't get my engine started... the glow plug is perfect the ignitor is perfect primed it perfect needles are at factory settings and i leaned out the LSN a little bit like told to and it wont start please help!?!!?!?!

 

[Jameswest21]

maybe you just lost your pinch in the engine....or you got some compression issues

 

[Rolex]

Threads merged.
Please keep each problem in one thread so we don't have to keep repeating what's already been advised.

 

[tannerhall4e]

help please

hey guys i really need help... i get my nitro engine running but the wheels are spiing very fast so i turn the idle down on the controller and they are still goin so i turn it down on the carb ( i turn it to the left) and u could hear the engine getting softer and softer until it dies? i still can't get a good idle please help

 

[Wolfgang10]

does it try to drive away when its on the ground?
my nitro would spin the tires if it were on the work bench and the tires were just in the air and not touching anything, but if it were on the ground the weight of the car would let it barely creep away from me without hitting the throttle.

 

[Rolex]

Threads merged AGAIN. You're still dealing with your tune.
Do NOT start any new threads on the same subject.