which clutch bell/spur gear

[challis349]

need a new clutch bell and spur gear for my savvy, have an axial .32, in an x with xl chassis, what is a good clutch bell/spur gear for me, want acceleration over top speed, so would a 14 tooth bell with a 52 tooth spur suit that?

 

[revo_rob_1984]

need a new clutch bell and spur gear for my savvy, have an axial .32, in an x with xl chassis, what is a good clutch bell/spur gear for me, want acceleration over top speed, so would a 14 tooth bell with a 52 tooth spur suit that?

if you want acceleration over top speed go with the smallest clutchbell you can get and the biggest spur gear

 

[olds97_lss]

Geez... if you can get the axial to run right, it should put out a decent amount of low end torque which will let you gear it taller but still feel torquey.

I'm running 16/47 in mine right now with a 1" extended chassis, 3-speed trans and LRP28S3 engine. I get easy wheelies in first and second. I get slipper slip when I'm hard on it into 3rd.

 

[Scrogg]

Agreed. No less than 16/49 gearing.

 

[challis349]

ok, through your reccomendation i have gone for 16/49 gearing, 18/47 i think was on it, so will have a little bit more torque at low end, thanks guys