Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
great thx so the glow plug will be the hottest at 1.5? but 1.4 is fine too? what voltage is too low thxnimh can go from 1.39 to 1.52,, 1.4 is good
Got a link to the glow heater your using? 1300mah is pretty low for a sub-c NiMH.
I just use a cheap AA heater with 1800-2550mah LSD cells.
Like this:
https://www.amazon.com/Ignitor-Igniter-Starter-Batteries-Compatible/dp/B087716DXN
and these:
https://www.amazon.com/Energizer-Rechargeable-Batteries-Pre-Charged-Universal/dp/B009NEKAEK
This one is decent as it can charge batteries individually and it comes with a 2A PSU:
https://www.amazon.com/18650-Battery-Charger-XTAR-Adapter/dp/B08R88KZJW
Puts out .5A for 4 cells (2 amps total), so could charge up 4x2000mah AA's in 4 hours, or 2 in 2 hours. I usually don't charge my AA's at anything more than .5A though. Many of those purpose built AA 4 cell chargers require you to put cells in in pairs. This one will do any quantity of 1-4 at a time.
1 fully charged 2200mah AA will get me through a break-in day with an engine without a problem. That's a lot of starts in a day on a single charge.
A higher capacity sub-c would be fine too:https://www.amazon.ca/Team-Associated-Factory-Starter-Charger/dp/B0006O6WDY
this is the one rn. factory team glow plug ignitor
kk thx for the input ill probably get one of those soon and or heard good things about the lipo ones