What connector do i need

[pjoseph]

I picked up a gensacearespammers lipo 11.1v to power 12v engine heater. The battery says it comes with 4mm banana type plug i am trying to figure out the connector that connects to that so i can put that on the heater to connect the two.

Thanks

 

[Rolex]

Not sure what you're trying to do here.
12V engine heater?
Are you sure you're not referring to a 1.2V glow ignitor?

A better explanation would be better and pictures would be great.

 

[pjoseph]

No not a glow ignitor its a 12v warmer
http://www.team-crp.com/New-Competition-Heat-Blue-Deuce-2-AC-Nitro-Engine-Heater-120V_p_53.html

 

[Rolex]

That's a 120V AC unit.

 

[SchrodeMode]

Did you get the one in your link? If so, that is a 120v heater and would have to be plugged into a wall outlet. If you did get the 12v version, it says it comes with a Deans connector. Do you have a lipo charger?

 

[pjoseph]

sorry that was wrong link i ordered the 12V engine warmer, and yes i know it comes with deans connector.

I want to replace the deans connector with the correct banana type ones that will work with the ones that come on the gensacearespammers battery. I prefer not to use another cable that makes the conversion from one to the other.

As far as a charger goes i will be ordering today or tomorrow still trying to figure out which one was looking at one of the following.

Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe
http://www.amazon.com/Combo-Special-Tenergy-Balance-Charger/dp/B00466PKE0/ref=sr_1_6?ie=UTF8&qid=1404767440&sr=8-6&keywords=tenergy+lipo+battery+charger&tag=casldica-20

OR

Thunder AC6

http://www.hobbypartz.com/thac6smbachw.html

i only have a nitro truck so charger will only be used for two lipos one for the engine warmer and another for a starter box.

 

[SMaxxin]

These should work


http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJPY4&P=ML

 

[pjoseph]

Thanks i will order some.

Does anyone have any input on the two chargers i listed above?