tips or better manual for the 969 charger?

[UltegraSTI]

got this yesterday. in my day i used tekins w/push buttons and adj'ble amperage til peak (110L and 112A) and of course the 15min jobs that i just use 2 sit and trickle batts up.

the manual (if u can call a sheet or 2 a manual) is very weak. i just wanna regular peak these batts and have em flick into trickle pretty quick (dont mind time). its overheated both of my Rx packs (not bad, but 2 much 4 my taste).

help any1?

-Ult

 

[Diver6127]

check the Milivots. If it's too high you'll overheat easily if it's too low, you'll false peak. For a receiver pack, don't know which one you're using, average is 25-30Mv.

 

[PiErow]

Diver with the brain if you do the stock setting which is 25mv they get way to hot and charge too fast. Put it on 15mv it it works real well. Also i have found if you push caharge when its on the minutes screen it charges for that long. For reciver packs i put it on 5 cells 1200 mah 15mv. I go to the mah setting and press charge. It counts up wards and ta daw its charged. Hope this helps.

 

[Diver6127]

once again, I stand corrected. Sorry, the 30Mv was for doing a 6 or 4 cell 3300mah battery pack ... DOH!