Tekno MT 410 2.0 build ideas

[FastEddieU]

So a while back i bought a Tekno MT 410 2.0 slider. I'm getting to the point I'd like to start throwing some parts at it! The problem is I'm a complete noob and new to this. I'd love to hear some of your guys suggestions on electronics that would pair well together for this thing! What do you guys think? Got any suggestions or perhaps can point me in the right direction if not?

FastEddieU

 

[Lostinthewoods86]

We started with a hobbywing max 10 with 3200 kv on 3s in ours to start. Now it’s running a max8 with 2500kv on 4s.

 

[FastEddieU]

We started with a hobbywing max 10 with 3200 kv on 3s in ours to start. Now it’s running a max8 with 2500kv on 4s.

Nice, thank you for your input! What sort of speeds are you seeing with those 2 setups? How about wheels, tires and bodies?

 

[9x19]

I'm running a Hobbywing Quicrun 10BL120 ESC and 3150kv motor in mine. Mostly run it on 3S and it does well for me.

 

[Lostinthewoods86]

Nice, thank you for your input! What sort of speeds are you seeing with those 2 setups? How about wheels, tires and bodies?

With the 3s set up it ran 38

haven’t put the gnss in yet with the 4s setup yet.

Geared pretty conservatively

 

[WRM]

I'm pleased with the Red's in my 1/8, but they're sold out (of both 1/8 & 1/10)?
https://www.reds-racing-usa.com/shop/ESCs-c127391164

I think @RustyUs has experience with MT410 power?...

 

[RustyUs]

I'm pleased with the Red's in my 1/8, but they're sold out (of both 1/8 & 1/10)?
https://www.reds-racing-usa.com/shop/ESCs-c127391164

I think @RustyUs has experience with MT410 power?...

Well, I'm only going off of what others have used and what's in the MT/SCT410 2.0 manuals as my starting point for my "monster" SCT410 2.0 build. I'm hoping a 2400kv 3665 size can motor on 3S is enough without running into heat issues.

Sometimes a specific "Kv" number, or a "Kv" range is posted (not just here in this thread... it's everywhere). And sometimes that kv number can be the same on two different widths & lengths of motors. I'm just here to say a person will not be happy with any 540/3652-ish size motor in this monster truck and glad Tekno didn't suggest any 540/3652 size motors in the manual, both manuals actually... these platforms are heavyweights. If buying an ESC/motor combo, just double check you are putting the right size motor in your shopping cart.

 

[FastEddieU]

View attachment 273033

With the 3s set up it ran 38

haven’t put the gnss in yet with the 4s setup yet.

Geared pretty conservatively

Good looking body! I'm hoping a can find a nice colorado body for mine! So it sounds like from what I've read in the thread that in the manual there are suggestions for parts. I'll have to try to dig that up! Thanks everyone for your feedback!

 

[Lostinthewoods86]

So it sounds like from what I've read in the thread that in the manual there are suggestions for parts. I'll have to try to dig that up!

https://www.teknorc.com/shop/tkr9501-mt410-2-0-1-10th-electric-4x4-pro-monster-truck-kit/

If the link doesn’t go directly to it, go to tekno site, under the mt410 2.0, click the resources link

Edit: the manual link is there too, the resources link give you some body, wheel/tire, and motor/esc charts