So, What R/C Did You Run Today?

[Xraycer]

You missed the goal no points for you

Yeah, you suck!

 

[332_RC]

I ran my tractor tire Gorgon. That thing is fun! I added a homemade 4mm aluminum tube sway bar. Mounted to the bumper with delrin tube & nylon clips that act as springs. Links are M3 RC rod ends. Does great! Doesn't nose dive & turns great! 23kg servo. 3500kv brushless.

 

[WickedFog]

I ran my tractor tire Gorgon. That thing is fun! I added a homemade 4mm aluminum tube sway bar. Mounted to the bumper with delrin tube & nylon clips that act as springs. Links are M3 RC rod ends. Does great! Doesn't nose dive & turns great! 23kg servo. 3500kv brushless.

View attachment 191581

View attachment 191582

View attachment 191583

View attachment 191584

View attachment 191585

Very cool man!

 

[332_RC]

Very cool man!

Thank you! Does wheelies for days. I pulled probably a 200 footer plus with it today. Fun to drive & launch

 

[Doom!]

I ran my tractor tire Gorgon. That thing is fun! I added a homemade 4mm aluminum tube sway bar. Mounted to the bumper with delrin tube & nylon clips that act as springs. Links are M3 RC rod ends. Does great! Doesn't nose dive & turns great! 23kg servo. 3500kv brushless.

View attachment 191581

View attachment 191582

View attachment 191583

View attachment 191584

View attachment 191585

That's pretty slick! I still can't get over how good that body transformation came out. Those tires are insane!

 

[332_RC]

That's pretty slick! I still can't get over how good that body transformation came out. Those tires are insane!

Thanks Doom! They actually handle 10x's better than stock. It goes really good. I've had a ton of fun with it. It's so light.

 

[Ramp addict]

Outcast 6s
The 5 minute rampage.

1 minute into the run I lost a front wheel. The hex carved a trough in the wheel. Loaded up and went to my Son's house to pick up a replacement.

4 minutes into our second try my truck turned front wheel drive and one of the rear driveshafts was poking out of the rear of the truck. The rear inner dogbone pin was sliding out. I took a rock to it to cross the pin to center it. When installing it I found I had a broken drive cup. Drive over.

 

[Ramp addict]

The Sledge.

The truck didn't look right so I pulled it over. 3 seized shocks and 1 with no oil in it (rebuilt them about a month ago)?! By this point I had lost my wing. Since I wasn't going to be flowing the dirt park, I went on a 45 minute long big air rampage. I haven't had this much fun in a long time.

 

[332_RC]

Ran my Infraction 6s. Destroy all tires. This thing is a riot!! 64mph! 50/200/20 diffs & dual fans only upgrade. Entire rig is covered in tire & parking lot debris. Super tough RC.

 

[Lostinthewoods86]

Didn’t break anything yesterday so we will try again

 

[Chubaka]

View attachment 191641
Didn’t break anything yesterday so we will try again

Ever thought of a tug of war?

 

[WickedFog]

Ever thought of a tug of war?

I think this event is hardest on them

And if you watch it, anything with the wheels tucked under the body seems to do best

 

[Lostinthewoods86]

Ever thought of a tug of war?

My son has mentioned it it wouldn’t even be fair, the mt8 is a beast that big rock has no weight to it

The were flying pretty good today. Need to make up an adapter to run the mt8 on 6s

 

[Chubaka]

My son has mentioned it it wouldn’t even be fair, the mt8 is a beast that big rock has no weight to it

View attachment 191644View attachment 191645

The were flying pretty good today. Need to make up an adapter to run the mt8 on 6s

Turn it into a speed contest. Hookemup and gun it. See who pulls who.

I had a tug of war with my stampede and a Bandit. Did it on tile for more of a challenge.

 

[Lostinthewoods86]

Turn it into a speed contest. Hookemup and gun it. See who pulls who.

I had a tug of war with my stampede and a Bandit. Did it on tile for more of a challenge.

We need to do it with the tmaxx and the mt8 that big rock doesn't stand a chance

 

[Lucifur10]

Ran the old E-Maxx Jeep at a Jeep meet today. Freakin ni-cads sure don't run for long.

 

[Lostinthewoods86]

I need to get back on this. Boy has to have the big bronco for recovery

 

[DavidB1126]

family of RC! Always wanted that. But I'm the only one who wants to do it.

 

[ahr43]

Grasstracked the Rock 'n Roll Rustler today. Converted her from SpeedSpec to GrassSpec and figgered I'd cut a fat hog and advance her to the finals. Fell short. She bows out as an also ran in the semi-final.

Swapped on a set of P-L Galdiator SCT tires on 14mm Raid wheels. Changed springs and shock fluid on all four corners and dropped the gearing from 2.00 to 3.60. Figgered the large can 3300Kv sensorless would have the grunt to pull a tall gear on the track. Figgered wrong. No snap off the corners and that's where she lost it.

Oh well, she'll get 'em next time. -AC

 

[Lucifur10]

family of RC! Always wanted that. But I'm the only one who wants to do it.

We'll all come over and play if you've got a track.....and some Oreo's.