Servo issue! Video..

[REVO-5309]

Just got a new hitec hs-81 and makes a lot of
Noise, but somehow fixed my original servo :S any ideas?

http://i72.photobucket.com/albums/i...E9-9D91-0681DF74F27D-521-000000E5C49828C2.mp4

 

[Phins Fan]

It looks like you didnt center the servohorn and it may have stripped some gears in the case trying to bring it back to the centerpoint

 

[REVO-5309]

Possibly. I had it sitting there is it shakes and slowly moves to one direction. This faulty?

 

[Phins Fan]

If moving to 1 direction I would say your horn needs to be recentered. Take your servosaver off the servo and turn on the tx/rx making sure your centered with the endpoints on your tx. Reinstall your horn back onto the servo as centered as possible (as straight as you can get the wheels) and retighten. Hopefully this will help

 

[Greywolf74]

+1 Phins Fan. If its still doing that after recentering and its always done that since you got it then yes I would definitely say its faulty.