Mxracer629
RCTalk Rookie
- Messages
- 24
- Reaction score
- 12
Hey guys, newbie here. I just recently purchased an XTE Blackout. Already went with a LIPO 2s 7.4V 5000Mah upgrade from the stock NIMH 7.2V 3000Mah. Ran fine for a while, today it overheated and started smoking. Turned everything off and let it cool. Took it apart and took pictures of how wires were connected to the servo. Hooked it all back up and now the car accelerates full throttle as soon as I plug the battery in, with the car being in the ON or OFF position. It doesn't matter. Never ran into this before. Also tried to check continuity with the switch being ON/OFF and nothing would register. Any suggestions?