Tom, here are the pics you asked for, hope this helps!
My old T8UAF (love this thing!), running on a 3s lipo pack.
Front
Back showing the modular TX design, that's a FrSky 2.4 module in it now
Modules looks like this
My Flip FPV quad
Openpilot CC3D flight controller housed in a kauaicuda case
Tiger 2208 1100kv motors
DJI Opto 30a ESC's
APC 9x4.7 props
RMRC-520 FPV cam
Skylark tiny OSD w GPS RX
OpenLRS RX
Immersion 250mw 5.8Ghz video TX
IBcrazy bluebeam antennas
A shot of all the goods
And here's my acro quad
DJI F450 frame
Openpilot CC3D flight controller housed in a kauaicuda case
DJI 2212 920kv motors
Flycolor 30A ESCs flashed with SimonK firmware
APC 10x4.7 props
FrSky 2.4 RX
RX mounting and antenna routing
Internals
My grab and go FPV setup
Case contains an RF explorer handheld RF spectrum analyzer, Archos 605 DVR, Immersion RC power distribution box, an Immersion RC 5.8ghz video RX, and all my antennas.
It all fits in this backpack, which I leash to the tripod while flying to prevent wind blowing it over, and the pack has straps that hold the quad perfectly on the outside. I remove the props to prevent them from being snagged on tree limbs, etc while walking / hiking into wherever I'm going to fly.
If you have any more questions, let me know, I'm more than happy to answer them if I can.
My old T8UAF (love this thing!), running on a 3s lipo pack.
Front
Back showing the modular TX design, that's a FrSky 2.4 module in it now
Modules looks like this
My Flip FPV quad
Openpilot CC3D flight controller housed in a kauaicuda case
Tiger 2208 1100kv motors
DJI Opto 30a ESC's
APC 9x4.7 props
RMRC-520 FPV cam
Skylark tiny OSD w GPS RX
OpenLRS RX
Immersion 250mw 5.8Ghz video TX
IBcrazy bluebeam antennas
A shot of all the goods
And here's my acro quad
DJI F450 frame
Openpilot CC3D flight controller housed in a kauaicuda case
DJI 2212 920kv motors
Flycolor 30A ESCs flashed with SimonK firmware
APC 10x4.7 props
FrSky 2.4 RX
RX mounting and antenna routing
Internals
My grab and go FPV setup
Case contains an RF explorer handheld RF spectrum analyzer, Archos 605 DVR, Immersion RC power distribution box, an Immersion RC 5.8ghz video RX, and all my antennas.
It all fits in this backpack, which I leash to the tripod while flying to prevent wind blowing it over, and the pack has straps that hold the quad perfectly on the outside. I remove the props to prevent them from being snagged on tree limbs, etc while walking / hiking into wherever I'm going to fly.
If you have any more questions, let me know, I'm more than happy to answer them if I can.