• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Post a picture of your HPI Savage!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
durwank said:
I love those Axial wheels!!!!!!!
Click to expand...

I assume you are referring to mine, and thank you. I think they are just about the best looking wheels out there, but they are kinda spendy. I really like the fact that I can change the tires easily and don't have to glue anything. I like the black chrome (with the Big Joes) set the best as the chrome on the other ones is starting to flake off. I want to get a set of them in flat black, I think they would look great with the new body that I got that I am painting mostly black.

taz1175 said:
That's a nice Mach 427 silver cooling head that you have on your Savvy.;):D
Click to expand...


Thanks, but it's actually an entire Mach 427 engine that came with my Losi 8ight-T. It has way more punch than the stock 4.6 that came with the Savage kit, but I have a new OS .30VG sitting here that I need to install. I've had the OS motor for 3 months now, and the first time I tried to start it I didn't preheat the engine and snapped the pull starter so I ended up putting the Losi back in. What I really like about the Losi is the backplate allows me to start it with my cordless drill. I just bought a new pull start for the OS a couple days ago and need to quit being lazy and put it in. It should really get my Savage movin'!!
 
supradude26 said:
I've had the OS motor for 3 months now, and the first time I tried to start it I didn't preheat the engine and snapped the pull starter... I just bought a new pull start for the OS a couple days ago...
Click to expand...

Just an FYI, pull starts are repairable. Might save waiting next time when you snap a cord. Once you do it a few times, you can take one apart, clean the recoil spring, rewind it and have it back together in 20 minutes.

I've done it a "few" times. ;)
 
olds - how about putting up a lesson on rebuilding a PS? i tried it a couple times and just coulding get the coil rewound and back in the housing. whats your trick.
 
olds97_lss said:
Just an FYI, pull starts are repairable. Might save waiting next time when you snap a cord. Once you do it a few times, you can take one apart, clean the recoil spring, rewind it and have it back together in 20 minutes.

I've done it a "few" times. ;)
Click to expand...

I've repaired them a few times too. The K4.6 I had snapped the cord several times, and I kept repairing it untill it was too short, then I just bought a new one. It was only $15.00 or so so it was no big deal.
 
this is my hopped up saage and i wanna sell it i need help any one know what it might

this is a savage 25 with a p3-.28 motor on it with all the trimmins like aluminum everything and hopups to boot help me out here

and its for sale i think i need a price tho any ideas

i has a list of hop ups starting as is

integy aluminum body mounts.
racing innovations skid plates and bumpers
hpi 3 speed trans kit
1 ince extended aluminum rails.
extended drive shaft stainless steel
stainless steel drive shafts and cv joints.
aluminum differential housing wilt graphite gears and aluminum bulkheads.
hpi racing aluminum shock towers.
integy aliminum piggyback shocks with aluminum springs in the back stiffer on take offs
reg plastik shocks in front
softer for landings
monster digs devil tails tires and six spike spoke rims aluminum
dual disk brakes system
aluminum carriers and hubs for the wheeles
aluminum hex hubs with spacers.
aluminum gas tank
picco p3-28 motor with integy motor mount aliminum blue)
i have also for it an rd innovaions super charger and nitro system but i dont wanna put it on tilli get the right rolll cage for it and i also have blue steel gas lines and

there is alot of crap on this and i have spare parts galore
 

Attachments

  • P1020530.webp
    P1020530.webp
    88 KB · Views: 222
  • P1020528.webp
    P1020528.webp
    83 KB · Views: 240
Last edited:
Hey guys, I haven't posted a picture of my new body since completing it 3 weeks ago. Took it for a test drive and rolled it once, so I figured I should get some photos before I get it too scratched up.

Here it is:
edited_01.webp

edited_04.webp

edited_03.webp

edited_02.webp

edited_05.webp


I posted a video with the old original body, but I wanted to make a custom F650. Its the Proline body made for the larger trucks but I put it on my Savage X. It would fit an XL better, so I made the holes match the XL body mounts and will get a conversion kit later. I'm going to lower the body mounts and make a bigger hole to fit the motor out of since it overheats with this body on. I also need to make a hole in the window for some air flow. But I wanted to keep it looking pretty for a photo op first.

What'cha think?
 
Last edited:
BOUTCH said:
Looks bigger, but they are about the same. If anything the Revo is wider a bit, but i say its because of the wheels. Hope the comparison helped tho.;)
Click to expand...

yes,it's great,I was thinking which is bigger because so many people say that Revo is small and Savage is massive...

Rolex said:
Sure. I have a gallon on standby, and spring is here. 77 degrees today.
Click to expand...

so what you waiting for Rolex?

Rolex said:
About 2" longer and another 2" wider than the stock Savage. Also about 9 lbs heavier.

Sav1ft.webp


Sav1lf.webp


WhShocks1.webp


SavFuelLines.webp


ExtSav1.webp
Click to expand...
that's one sweet Savage...
can't wait to see it on Ebay :hehe::p:
just kidding :hehe:

and I just realize that you got some sweet wheelie bar on it.
 
Last edited:

RC Builds

Back
Top