• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Build Thread Lost in a Tekno MT410

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
You've already put too much work into it. You're supposed to just duct tape it on there and go rip. We both know it's coming back bloody 😆

You ain’t wrong 🤣

I didn’t spend much time drawing something out on this one. It’s based off this

A533C918-B556-4183-B740-3B17A4932220.jpeg


I didn’t put that much detail into it though.

It’s drawn up and got the first coat of mask on
 
You ain’t wrong 🤣

I didn’t spend much time drawing something out on this one. It’s based off this

View attachment 202240

I didn’t put that much detail into it though.

It’s drawn up and got the first coat of mask on
Oh sweet. Don't forget to shoe goo it. Our Kraton body has been through hell today. 30+ mph, head on into a tree. Numerous jumps and landing on its roof. And that body is still free of any major damage.

The front right driveshaft is dangling though. Need to see what that's all about.

Tell me, out of all these trees in this field... which one do you think they hit?
Screenshot_20240914_130000.jpg


On a more serious note, how do you hit that tree with a football field to drive in 🤔😅
 
Last edited:
Oh sweet. Don't forget to shoe goo it. Our Kraton body has been through hell today. 30+ mph, head on into a tree. Numerous jumps and landing on its roof. And that body is still free of any major damage.

The front right driveshaft is dangling though. Need to see what that's all about.

Tell me, out of all these trees in this field... which one do you think they hit?
View attachment 202243

On a more serious note, how do you hit that tree with a football field to drive in 🤔😅
I swear those trees move to wherever you are driving 🤣

Last time we had ours out, my son hit my daughters granite with the mt8, broke the axle. I was running the tmaxx and just turned to see what all the commotion was about and ran the tmaxx right into a tree and snapped the front bulkheads off it 😂
 

Did you do monster truck stuff with it?
Run over your others!!!
I'll give you a sound system for it if you'll use it lol make it SOUND like a monster

We only ran it on a storaged battery so it was short lived, I was trying to get the programming and steering set up. It’s a wheelie machine for sure 😂. I’m about to get this body done after dinner and hopefully open it up tomorrow 😁
 
We only ran it on a storaged battery so it was short lived, I was trying to get the programming and steering set up. It’s a wheelie machine for sure 😂. I’m about to get this body done after dinner and hopefully open it up tomorrow 😁
Cool. So everything works good huh. Glad to hear it.
 
Well the bashing body turned out as expected 🤣 but we know the fate of it so oh well 🤣. I rushed this one just so we can run this thing.

View attachment 202315

We sending it tomorrow 😜

I ain’t wasting the decals or shoe goo n drywall tape on this one 😂
Looks tremendous sir!!! Love the contrast, and should be plenty easy to maintain orientation of!!

🤩🍻🤘
 
Last edited:
That looks fine bro. Especially for a basher body. If you can do that without giving a damn, you're going to rival Littlemotor's paint jobs in no time 😅
 
Looks tremendous sir!!! Love the contrast, and should be plenty easy to maintain orientation of!!

🤩🍻🤘
Thanks man!

For a second I thought that was my boy! Skinny as a weed!

I love that green, but I LOVE green
It’s createx wicked limelight green
That looks fine bro. Especially for a basher body. If you can do that without giving a damn, you're going to rival Littlemotor's paint jobs in no time 😅
I wouldn’t go that far 🤣 and I’ve seen some of your work as well 😍.

the lines are rough on this one, I didn’t put enough mask on it and some spots weren’t even completely dry 🤣 but after that little test run yesterday I had to get it done 🤣
 
Thanks man!


It’s createx wicked limelight green

I wouldn’t go that far 🤣 and I’ve seen some of your work as well 😍.

the lines are rough on this one, I didn’t put enough mask on it and some spots weren’t even completely dry 🤣 but after that little test run yesterday I had to get it done 🤣
I was wondering why the edges came out a little choppy in this. Good to know. I have only used liquid mask a couple times, but I did 5 coats with a few hours dry time.

I'd still shoe goo that bad boy. You'd have to pain't the windows black or something. But you'll get a lot more life out of that body.

This body has been through hell, and it is still going strong. Yesterday it slammed into a tree at over 30 mph. It's been 20 feet in the air and landed on its top a number of times with a heavy ass kit landing on it. No cracks or damage at all.
Untitled554_20240915081800.png

Untitled555_20240915081820.png

Untitled556_20240915082155.png
 
I was wondering why the edges came out a little choppy in this. Good to know. I have only used liquid mask a couple times, but I did 5 coats with a few hours dry time.

I'd still shoe goo that bad boy. You'd have to pain't the windows black or something. But you'll get a lot more life out of that body.

This body has been through hell, and it is still going strong. Yesterday it slammed into a tree at over 30 mph. It's been 20 feet in the air and landed on its top a number of times with a heavy ass kit landing on it. No cracks or damage at all.
View attachment 202353
View attachment 202354
View attachment 202355

Yeah I only put 3 coats on it. It was super thin.

We don’t have time for the shoe goo today 🤣 batteries are already on the charger. It’s getting sent 🤣
 
Yeah I only put 3 coats on it. It was super thin.

We don’t have time for the shoe goo today 🤣 batteries are already on the charger. It’s getting sent 🤣
Lol. I get it 😅
 
Back
Top