Hi
My losi aftershock is stuck in second gear, and wont come out.
When it is of and i try to pull it back the wheels dont move back but they do go forward.
Anyone know how to get it out of 2nd gear???????
Sounds like what happened to mine when I was breaking in the LRP. The aftershock's 2 speed assembly is very weak and prone to failure over time. The aluminum ring molded into the 2nd gear spur isn't enough to deal with the forces the shoes put on them and it bends/warps. When it does this, the steel pellet in the shoes goes beyond the flat spot on the cam/shaft it spins on and jams it into 2nd gear permanently.
This is the shaft with the flat spot I was talking about:
You can see where my shoes jumped the flat spot and spun around on the rounded areas.
My suggestion is to get an LST* 2 speed assembly. You can usually find them on ebay, but you have to be careful and look closely at the photo's so someone doesn't sell you the aftershock version instead.
The one you don't want doesn't have a silver hub for the first gear holding the one way bearing and a silver hub for the second gear where the 2 speed shoes go.
First though, I'd take yours apart and see if that's your issue. It's not hard to take apart, you just have to remember the order that parts go back on. Having a parts explosion helps.
You take off the slipper nut, then take all the pieces off one at a time.
nut -> washer -> spring-> washer -> thrust bearing -> washer -> 1st gear -> washer -> 2nd gear
Then put them back on in reverse order. Once you get the first gear off, you can see the second gear to see if the shoes are jammed up on you.
I'm not sure how well that would work for a basher with large tires and stock engine... it's geared more for racers that run lighter tires. Running a single speed for me would just burn up clutch shoes.
I have a lst and made it a xxl. Got An extended chassis and drive shafts. I have had the same 2nd gear problem. Replaced everything and still does it. Thanks for your info.