I think I need to pay better attention.

[Alexander_0_1]

Hey guy that reads this...... I think I goofed up when ordering my lipos. I had put some 3s 5000mah lipo for another r/c in my shopping cart, along with the lipos I was going to order for my wraith, and then a buddy offered me a fair deal on said r/c, anyway when I was placing my order I decided to delete the lipos I no longer needed, or at least that's what I thought....what I actually did was delete the lipos I need, and kept the lipos I don't.

Now for the time being this is what i wanna do, do you guys have any tricks I could use to protect them?

Here's a top veiw:

 

[Greywolf74]

just get a little foam to put on the sides of it so the lipo can't move around in teh battery cage.

 

[Alexander_0_1]

It's tight enough that it won't move side to side, but it does drop until the battery balance Leeds are resting on the cage, I think I'll have to look for a different battery tray to help support the weight a bit. I am sorta worried that something will puncture it though.

 

[flm_savage]

I wouldn't run it like that. I use these anytime I get a vehicle that needs solid battery support.
Soft packs make me nervous anyway.

 

[Alexander_0_1]

Thanks for the link, I need something just like that for anther rc just sitting here collecting dust.

All i did was use a C.I battery tray for support, and rc4wd fenders for extra protection, although I'm not totally happy with the way it is, it'll work until I get a winch, and smaller lipos. With the 14 pole 2000kv revolver, and under drive gears, its not terribly fast, but it is torquey, too torquey for a fully tightened rrp slipper.