• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Gen's Ace 2S reads odd on battery monitor.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

biggman100

Hardcore RCTalk User
Build Thread Contributor
Messages
1,966
Reaction score
1,408
Points
420
Location
Corning, NY
RC Driving Style
  1. Bashing
I have a Gen's Ace 2S 50C 5000MAH that on a battery monitor reads as a 3S, with one cell showing 1.20V, one showing, 5.42V, and one showing 58.5V. All my other batteries, using the same monitor read right, so, i am assuming that battery is bad, but, i could be wrong. Any thoughts?
 
Give it a salt water bath outside of the house for a day or so and then it can be disposed of.
 
Give it a salt water bath outside of the house for a day or so and then it can be disposed of.
I thought maybe it was just because it was cold out (around 18 degrees), but, even after letting it warm up, it had the same readings. As for a salt water bath, given the outside temp the next few days, it will be a block of ice. Its 18 today, and the next few days are supposed to 11, then 7, then 5, and 1 by Tuesday.
 
I thought maybe it was just because it was cold out (around 18 degrees), but, even after letting it warm up, it had the same readings. As for a salt water bath, given the outside temp the next few days, it will be a block of ice. Its 18 today, and the next few days are supposed to 11, then 7, then 5, and 1 by Tuesday.
The reason for the salt water bath is to neutralize the chemicals in the battery making it safe for disposal and prevent the fire/explosion possibility.
 
Back
Top