Engine problem

[MasterChef11732]

hello, IExpress but it does not give a specification. I would like to know which battery to use so that my engine does not break. I make an excavator in 3D printing. Can you help me please. sorry for my English

 

[tntpoof]

still not enough info on servo.. Id say unless you have a radio that servo wont work is it endless?servo can be from 4.5 to 8.6 and theres some that will run on move voltage.plug servo # in web see what you find.id get a 3 cell servo with a ubec (so you dont use full voltage but have it limited by ubec)

 

[MasterChef11732]

the motor will go to ESC then to a wireless controller. I find it difficult to understand. I don't know electronics very well
What is find.id

 

[Greywolf74]

the motor will go to ESC then to a wireless controller. I find it difficult to understand. I don't know electronics very well
What is find.id

The ESC will plug into a receiver. The motor will plug in to the ESC. The ESC plug into a battery. Your servos will plug in to the receiver also. The receiver and the servos will be power by the battery, through the ESC.

I hope that helps. I really dont understand what you're asking.

 

[MasterChef11732]

Go back tu see up