Charger help

[psunitro]

OK, I have a Dynamite Mega Peak http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN4053
and I am false peaking my Rx packs.I'm charging at.8v for my 1100 rx pack, so thats not an issue. What settings could be off?

 

[Pinblaster]

Assuming you are using NiMh packs, your peak detection should should be set at 0.02-0.03v (for the whole pack) before your charger shuts off. Your charge rate should be set to 1.1 amps for the 1100 Mah pack. This info is from Jim Dieter (Team Trinity), one of the leading experts on RC batteries and charge rates.

 

[rbmaxxbasher]

uh, yea. What he said.