can't get it started

[nitrost]

i can not get my evader started to me it seems like theres fuel going in the line but its not going into the carb i checked for leaks but it was all good do u guys have any suggestions

 

[Bouzouki]

Glow plug, glow ignitor.

 

[nitrost]

both are working i took them out and tried it

 

[jmarzilli]

Are the fuel lines clogged?

 

[Pinblaster]

You may need to check your HSN & LSN adjustments. Yesterday was a bear for everyone at our track. It started out a fairly cool 70's then shot to the upper 80's low 90's and humid as all get-out. I could get mine started when it was cold, then after a few laps it would die. I got out in the lot trying to get it retuned and when I thought I had it perfect, shut down, refueled, and clipped the lid back on, it didn't want to restart. After changing the glow plug and getting frustrated because the problem was still there, I decided to bottem the HSN and start from scratch. It turned out my HSN was only out 1.75 turns and I was starving the engine. Temps never got above 230's and my mil seems to run best around 250-253, so I kept trying to lean it out thinking it was the right way to go. Wrong!!! I went back to factory settings and started adjusting from there. No more stalling. :thumbsup: :breakdown

 

[nitrost]

ok thanks i give it a shot tommorrow

 

[nitrost]

got it going just had to adjust the hsn