Plaidfish
RCTalk VIP
Supporter
I have a Keg-o-rator, small refrigerator for a keg and it's got a tap on top....uses Co2 to keep the keg pressurized....there is a regulator and it's set for 20 PSI, I've tried everywhere from 5 to 30PSI and get the same results.......I put a fresh CO2 can in w/ this keg and when I try to pour from the tap it really foams up alot...(normally too much head would not be words in my vocab....but)
if I bleed the CO2 valve at the keg before I tap, it's slow but no foam...I just wasted a whole can of Co2 and the keg is only half empty......anyone know WTF is wrong here??? How do I not have to bleed the line to tap this puppy
if I bleed the CO2 valve at the keg before I tap, it's slow but no foam...I just wasted a whole can of Co2 and the keg is only half empty......anyone know WTF is wrong here??? How do I not have to bleed the line to tap this puppy