Battery holder help

[solly69]

When i moved house i managed to Lose the battery holder for my ACOMS TECHNISPORT 2.4GZ RADIO SYSTEM (Controller end)

I have attatched a picture if any1 could give me a link to one that would fit or even a battery pack that would slot straight in as i run rechargable batterys anyways

I dont know the 1st thing when it comes to batterys and have had it all explaned to me before but still doesn't make sence... just not my cup of tea

Thankyou

 

[hamz9561]

Here is a link for a pack that should fit in the compartment that shouldn't need a holder:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDXC8&P=0

 

[olds97_lss]

I don't think that's the right pack hamz. It looks like a JR/spektrum style holder is needed:
http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPB970

I'm not sure what you can use as a drop in rechargeable though. I just either use a pigtail receiver plug that I install in the radio (take apart, drill a hole, solder a pigtail in the battery wires) or the charging jack on the radio. I use a holder like I linked above to hold 8 NiMH cells. I use duracell 2650Mah NiMH cells.

 

[solly69]

That looks like what i need. THANKYOU
Because i am located in Australia and that company does not shipt to Australia i went looking on Tower Hobbies and found this 1
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPBK6&P=7
was wondering if it is pretty much the same product that you recomended

 

[olds97_lss]

Yep, looks to be very similar and should work. Although, I'm not sure of your radio and the polarity of the holder. Just make sure that if you do get that one that the +/- is right for your transmitter before dropping it in.

 

[hamz9561]

Sorry about the wrong info, I was guessing on that answer. It looked that the linked pack might fit though.

 

[solly69]

yea thats what kinda confused me but I'm sure ill work it out when I'm not so tired
Thankyou for your help.
RCNT Serves its purpose again